TC Helicon Mic Mechanic 2 Vocal Effects Pedal red new

Description

Thank you for looking at our products. We deliver products with sincerity. Thank you in advance.

■Compact Effector for Vocal

■Tone/Pitch Correction

■Reverb, Echo

■studio-quality reverb

The reverb effect is based on the algorithm used in TC-Helicon's flagship VoiceLive line of products, and offers subtle spatial expansions with simple operation.

■Delay

A wide range of delay styles can be created, from crisp, slapback echoes to spacey long delays. The Tap Tempo function lets you set the delay time according to the tempo of the song.

■perfect pitch

The automatic chromatic pitch correction function automatically adjusts the pitch of your voice to the closest chromatic note. Provides natural pitch correction without discomfort.

■Adaptive tone to optimize voice tone

Mic Mechanic listens to your voice and automatically optimizes EQ, comp, de-esser, and noise gating.

■Support for Mic Control function

Mic Mechanic is compatible with TC-Helicon's MP-85 super-cardioid handmic with Mic Control function (sold separately). You can turn the effect on or off via the microphone from a location away from the Mic Mechanic.

■Key Features

・8 High Quality Reverb and Echo Combinations

・Tap Tempo function lets you set the tempo of the echo by tapping the footswitch in time with the rhythm.

・Tone button that combines an adaptive EQ, compressor, de-esser, and gate

・Natural automatic chromatic pitch correction

・Easy connection to standard microphones and mixers

・Phantom power (Always ON, Measured Value: Approx. 21 V)

・Remote on/off of effects via optional MP-85 microphone

・Equipped with automatic microphone gain function

■Power: 9VDC adapter (adapter sold separately/PowerPlug9), 4 AA batteries

■Procedure for using the MP-85 MIC CONTROL function

Connect the dedicated microphone "TC HELICON/MP -85" and turn on the power switch while holding down the foot switch. To switch between Tap Tempo and the normal effect ON/OFF function, hold down the switch on the unit for two seconds. The same applies to the microphone, and holding down the switch at hand for two seconds toggles between available modes.

*The output is the balanced microphone level. Be sure to use an XLR female-male mic cable to connect to the XLR mic input jack. If the line input jack of a TS/TRS phone is connected, noise will be generated, sufficient volume will not be obtained, noise will be noticeable when the gain is raised, etc., and normal use will not be possible.

*To prevent malfunctions, be sure to turn off the phantom power of the connected device.

Condition: New

Ships by FedEx(US) or DHL or JP Post(INTERNATIONAL) or UPS.

Your order will be dispatched to you within 5-10 business days from the date of payment.