SS-331H Digital LCD Desoldering Station Electric Desoldering Gun Tin Sucker 220V
（
The item does not support 110V）






Description：


SS-331H LCD desoldering station is efficient desoldering tool with a built-in vacuum for through-hole boards and components. It is a thermostatically controlled desoldering station that vides low cost and high performance. Ergonomically friendly structure allows one hand operation, only takes a few seconds per pin, more safe, efficient and comfortable.






Features：




- High power desoldering tool with vacuum


- Efficient operation, quick and easy


- Microcessor Controlled, vides accurate temperature control from 160 to 480°C


- Ceramic heater, vides fast heat up, fast recovery and high insulation resistance


- Designed with a quality heating element, it vides higher performance and longer lifetime than traditional type




- Built-in high power 600mmHg air pump, particularly for lead-free desoldering of multilayer boards


- Large LCD display


- Quick and easy to set the desired temperature and check the actual temperature.


- Fahrenheit or Celsius unit selection.




Specification


Type: Electric Desoldering Gun


Model:SS-331H


Voltage:220V 50Hz （NOT support 110V）


Soldering Power:90W


Power Consumption:140W


Temperature:160°C ~ 480°C


Vacuum Pressure:>600mm Hg


Heating Element:Ceramic Heater


Size: 172*135*190mm


Weight: 2.0kg








SS-331H Correct Use




1.After each work, it is recommended to suction 3-5 times and empty the residual tin in the tube;




2.If the interval between use is about 20 minutes, it is recommended to clean the steel pipe with a needle after air suction;




3.It is found that the suction is reduced during use, please clean the steel pipe with a needle;




4.If the frequency of use is very low, it is recommended to adjust the tin gun to about 200 degrees, and then to the working temperature when using;






5.When the tin slag in the tin storage cylinder is about 1/2, it should be cleaned in time. When the filter cotton is found to be hardened, it needs to be replaced in time.




What's in the package:




1x Electric Desoldering Gun


3x Nozzles


4x Filter sponges


3x Needles


1x User manual