• Fitment: 1994-2004 Ford Mustang  
  • Position: Front+Rear+Lower  
  • Package Included: 2 x Part Rear/Front Sway Bar End Link-K8848 2 x Part Front Inner Tie Rod End-EV127 2 x Part Front Lower Ball Joint-K8749 2 x Part Outer Tie Rod End-ES3184RL
  •  
  • Replacement Guideline
  • Ball joints
  • 8x Front Ball Joint Tie Rod Sway Bar For 1994-2004 Ford Mustang ES3184 EV127

    Fitment:
    1994-2004 Ford Mustang

     

    Position:
    Front+Rear+Lower

     

    Package Included:
    2 x Part Rear/Front Sway Bar End Link-K8848
    2 x Part Front Inner Tie Rod End-EV127
    2 x Part Front Lower Ball Joint-K8749
    2 x Part Outer Tie Rod End-ES3184RL

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

    Item Specifics
    Brand auspartshouse
    Manufacturer Part Number 13368266
    Manufacturer Warranty 1 Year
    Placement on Vehicle Front Rear Lower
    Type Sway Bar Link
    Universal Fitment No
    Suspension Grade Standard
    Custom Bundle Yes
    Interchange Part Number K8749 K8848
    OE/OEM Part Number Suspension Stabilizer Sway Bars Ends Linkages Assembly,Ball Joint
    Superseded Part Number Front/Rear Driver and Passenger Side Replacement
    Adjustable Yes
    Greasable or Sealed Greasable
    Surface Finish Premium Quality

    Payment:
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping:

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns:

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback:

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us:

    Any question or problem, please feel free to contact us via ebay message.

    Shop Category

    8x Front Ball Joint Tie Rod Sway Bar For 1994-2004 Ford Mustang ES3184 EV127

    Fitment:
    1994-2004 Ford Mustang

     

    Position:
    Front+Rear+Lower

     

    Package Included:
    2 x Part Rear/Front Sway Bar End Link-K8848
    2 x Part Front Inner Tie Rod End-EV127
    2 x Part Front Lower Ball Joint-K8749
    2 x Part Outer Tie Rod End-ES3184RL

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.
    Item Specifics:
    Brand :auspartshouse
    Manufacturer Part Number :13368266
    Manufacturer Warranty :1 Year
    Placement on Vehicle :Front Rear Lower
    Type :Sway Bar Link
    Universal Fitment :No
    Suspension Grade :Standard
    Custom Bundle :Yes
    Interchange Part Number :K8749 K8848
    OE/OEM Part Number :Suspension Stabilizer Sway Bars Ends Linkages Assembly,Ball Joint
    Superseded Part Number :Front/Rear Driver and Passenger Side Replacement
    Adjustable :Yes
    Greasable or Sealed :Greasable
    Surface Finish :Premium Quality

    Payment:
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping:

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns:

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback:

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us:

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.