Description:
Direct plug-in replacement, Features top grade silicone magnetic steel , and German copper wire and high temperature epoxy. The internal winding design is optimized for higher energy racing application. It deliver 15% more energy than other coil, The advanced bobbin technology increased the durability, all coil products were validated with most strict performance and environmental test, resists shock and vibration. Secondary contacts are made of brass, maximum the energy transfer to spark plug.
1. Wire--Imported from German Elektrisoal,top quality in the world.
2. Epoxy-- Imported from German Elektrisoal,top quality high insulation epoxy.
3. Plastic—GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
This is a set of eight (8) brand new, high quality direct fit Ignition Coils with boots & springs.
lifetime Warranty 100% Satisfaction Guarantee & 30-Days Money Back.
These coils are of superior quality & are ISO9001 Certified for quality assurande.
Super high di-electric performance epoxy & Superior quality copper wire & Super high conductive coil
Part number cross reference:
3L3Z12029BA-3L3E12A366CA, 3L3Z12029BA-3L3U12A366BB, PZT14F, HT15, PZH14F
PZH14F, HT15, PZT14F, SP507, SP515, SP546, GN10182, 5C1584, 50082, E508
SP515, SP546, DG511, DG-511, FD508, C1659, C1541, C1659, DQ50101D, UF537, UF-537
3L3Z12029BA-3L3E12A366CA, 3L3Z12029BA-3L3U12A366BB
Features:
Input Voltage: DC 12V
Connector Gender:Female
Terminal Gender:Male
Connection: 2 Pins
Terminal Type: Blade
Product build in coil boot and spring within its assembly
Copper Windinga inside with better connectivity
Designed to deliver trouble-free, consistent performance
Improved coil efficiency reduces the need to generate high voltage, right for your vehicle and lifestyle
Excellent mechanical stability and corrosion protection
Lower fuel consumption and reduced exhaust emissions for your vehicle
Manufactured to meet or exceed strict quality requirements
Package included:
8x Ignition coils
8x Spark Plugs
Fitment:
2005-2008 Ford Expedition 5.4L V8
2006-2008 Ford Explorer4.6L V8
2007-2008 Ford Explorer Sport Trac4.6L V8
2004-2008 Ford F-150 5.4L V8
2005-2008 Ford F-250 Super Duty 5.4L V8
2005-2008 Ford F-250 Super Duty 6.8L V10
2005-2008 Ford F-350 Super Duty 5.4L V8
2005-2008 Ford F-350 Super Duty 6.8L V10
2005-2007 Ford F-450 Super Duty 6.8L V10
1999-2007 Ford F-550 Super Duty 6.8L V10
2005-2008 Ford Mustang 4.6L V8
2006-2008 Lincoln Mark LT 5.4L V8
2005-2008 Lincoln Navigator 5.4L V8
2006-2008 Mercury Mountaineer 4.6L V8
Failure judgment:
A.If the engine failed with the ignition system, such as inability to start up, lack of strength for fail, etc. the ignition coil shall be checked.
B.If the ignition coil is not damaged in appearance, measure the primary and secondary resistance of the ignition coil, if it exceeds the rated range, the ignition coil shall be judged as disable.
Installation check and judgment:
Start up the engine after installation, to confirm the failure is eliminated.
Suggestions on Safety & Environment Protection:
A.Prior to the replacement of the ignition coil, make sure that all the high voltage outputs have been switched off, in order not to cause bodily injury.
B.In order to protect the environment, please hand the replaced old parts to professional service station for recycling, or a professional reject disposal agency. Thanks for your cooperation!
Advantage：
BEST IGNITION COIL PACK AVAILABLE - Our ignition coil are tested and meet or exceed performance requirements,buy Precision Auto Labs ignition coil can save over $50-$100 in US auto parts store
HIGH QUALITY MATERIAL SELECTION - Our ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
FEATURES - Each coil is design for specific application, low-emissions, and high energy output, and they will eliminate misfires and provide maximum voltage
COMPATIBLE VEHICLES - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase
Notes: Fits 3-valve engines only with early style 16mm high thread design spark plugs. Replaces coils with
short 4.00 inch black boots and are marked 3L3E on top of coil only.
THESE DO NOT FIT THE 2004 and newer F-150 with the 4.6L V8.
The 2004+ 4.6L V8 model F-150 uses the "DG508" coils that you can find in our store!
ATTENTION!!!!This's a straight shaft ignition coil,the curve shaft coil also in stock.Most customers
always mixed the straight shaft & curve shaft , and purchased the wrong item . Please review the info above
carefully to make sure this part fits your vehicle. If you have questions on whether this
part fits your vehicle,
please feel free to contact us via eBay.Thank you !
Why choose us?
PAL produce the coils only with the top quality material to ensure the performance and durability.
Our ignition coils are high performance, have 15% more enegy than coils.
1. Wire--Imported from German Elektrisoal,top quality in the world.
2. Epoxy-- Imported from German Elektrisoal,top quality high insulation epoxy.
3. Plastic?GE Valox resin, professional high voltage di-electric resistant resin.
4. Certified by TS16949 quality control system .
Certificates of our product：
Our Factory：
