eBay

Feature:

1. Brushless Water Pump: Brushless pump with permanent magnetic rotor, no maintenance needed. Coils and circuit boards are sealed with resin. Pure copper coil, low temperature rise, long lifespan.
2. Dual-Purpose Pump: Supports use in water or out of water. USB DC5V input, convenient power supply. IP68 rainproof grade, fully submersible. Detachable design for easy cleaning of the pump.
3. Quiet Water Pump: Low noise, fully immerse the pump when using. There are 4 rubber suction cups on the bottom, which can be attached to smooth surfaces to reduce noise and shaking.
4. Preferred Structure: This fountain pump is made with premium ABS, enduring and environmental guard that not pollute the liquid. Designed to be small in size, light in weight, and easy to use.
5. Wide Applications: Suitable for aquariums, fountains, car cooling, , small and medium-sized fish tanks, circulation systems, car cooling, computer water cooling systems, and more.

Specification:

Detachable design, providing convenience for cleaning work. With a filter to bypass blocking the inlet. 4 rubber suckers on the bottom that can absorb on smooth surfaces and reduce noise and shaking. Suitable for aquariums, fountains, small , and circulation systems. Pump running at a super-quiet level, the motor inside produces no noise, which gives you a quiet environment.

Item Type: Brushless Water Pump
Cable Length: 1.2m/3.94ft
Tube Length: 1m/3.28ft
Maximum Lift: 3meters/9.84ft
Item Size: 59.5x49x42mm/2.34x1.93x1.65in
Package Size: 13x11x5cm/5.12x4.33x1.97in
Gross Weight: 184g/6.49oz

Package List:

1 * Water Pump

1 * Pump Cover

1 * Instruction Manual

1 * Hose

Note:

1. Before starting up, please check the voltage and power of the pump power supply.

2. Cut off the power before installing/placing/removing the pump from water; otherwise, the pump will not be able to discharge water due to air in the pump.

3. Utilized in water or other liquids (without particles and impurities); not suitable for viscous and acidic liquids.

4. Do not dry burn the pump, as it will damage the pump.

5. Switch the power on and off several times to eliminate air in the pump impeller and pipeline.

6. When the pump is utilized in a high temperature environment (100°C), it can only be installed in a non-submersible manner.