RED submersible marine grade fully waterproof LED strips with acrylic foam adhesive on the back. Mount under your gunnels, under rub rails, or anywhere you need rugged LED strips that can handle the marine environment.  To mount, clean the surface with Isopropyl rubbing alcohol, peel the tape of the double-sided tape and stick. If mounting under rub rails on the outside or on rough surfaces, use a silicone adhesive to mount them. Pro Tip: Use masking tape to hold in place while the silicone adhesive cures.

1/2” Width, 1/4” Height
Wire Length: 12” Approximately

Technical Specs:

• LED (QTY):  60 PCS per Meter / approx. 18 per foot
• Watts: 4.39 per Foot
• Lumen: 290 per foot
• Amps: 0.37 per foot
• Volts: 9V-13V
• Beam: 120-degree beam
• Waterproof: IP68 - Submersible
• Low power consumption
• Easy Upgrade - Use existing red/black +/- wire and original switch

Package Contents:

• IP 68 Submersible Marine LED strip with 12" 20 AWG with tinned stranded copper wire lead
• One (1) Year Limited Warranty