The pipe crimping size range is adjustable.
A and D models can crimp pipes with an outer diameter of approximately 13–27 mm (if the pipe is too thick, consider whether the pipe fitting exceeds 27 mm; otherwise, it won't fit).
B model can crimp pipes with an outer diameter of approximately 9–21 mm (if the pipe is too thick, consider whether the pipe fitting exceeds 21 mm; otherwise, it won't fit).
Model C is only suitable for standard pipes with an outer diameter of 14-14.5mm. Its performance is inferior to Models A, B, and D. If high crimping quality is required, Model C is not recommended.
Note:
1. This machine is designed for crimping common pipes and sleeves, such as high-pressure hoses for agricultural sprayers. It cannot crimp excessively hard iron sleeves, as this may cause tooth wear.
2. As an iron hardware tool, localized rust spots may occasionally appear on parts. This is normal and we appreciate your understanding.
3. This hardware tool is shipped loose from the workshop. Minor localized paint chipping is common. Customers with high aesthetic expectations should proceed with caution when ordering.
