Ball Press Pressure Tester Meter Heat Testing Tool Apparatus t

Application:

• This experiment device is designed according to the "ball pressure test " requirements in GB2099 standards, mainly used for heat testing in household and similar plug sockets products. 
• It is the necessary equipment for relevant manufacturers and qc department for product quality inspection and control.

Technical parameters:

• Ball diameter: 5mm(R2.5mm)
• Total Test pressure: 20N±0.2N
• Sample support stand: diameter 50mm, length100mm,stainless steel solid cylinder
• Producing Materials: all made of stainless steel
• Reference standard: GB4706.1-2005, GB2099.1-2008,GB/T5159.21-2006,IEC60695-10-2:2003
• Notes: Supporting the use of the Ball pressure test we also Need two extremely hot ovens additional.

Usage:

• The ball pressure test is making the the metal ball (R2.5mm) and the 20N ± 0.2N ball pressure test apparatus to pressure the testing sample surface which was placed in a heating box in standard state.
• After 60min +2 min/0min under specified temperature of the sample test, fastly (<10s) put the test sample in 20 ° C ± 5 ° C water, cooling 6min. Within 3min after removing from water, measure surface indentation diameter of the test product , to see if it’s indentation diameter is more than 2mm or not to evaluate the test sample Heat-resisting deformation capacity under the specified temperature
• According to the test requirements, first put the ball test device in heating box for a long and enough time to ensure that the ball pressure device has achieved stable testing temperature before starting testing.
• Putting the tested parts on the supporting base, make it direct contact to supporting base.
• Putting the surface of tested parts in a horizontal position, press this surface by steel ball (See below). The Test should operate in the standard temperature heating box.