
Package Include:
1x Relay Receiver board (include shell)
2x Transmitters (contain battery)
1x Product manual
Parameter:
-Receiver Working voltage: DC 6~30V
-Input/Output voltage: 1~250V
-Quiescent Current: <5MA
-Max current: 10A
-RF frequency: 433MHz
-Working temperature: -30~+80
-Receiving Sensitivity: >97dbm
-Amount of storage remote controls: 20 pieces
-Support encoding: 1527 Leaning code
-RF Operating mode: ASK superheterodyne wireless reception
-Receiving range: Open space is more than 50 meters
-Pin: COM,NO,NC
- Operating mode: Momentary /Toggle/ Latched Mode
-Battery: 2x CR2016(included)
Usage(Operation Mode):
Momentary Mode:
1. Press and hold one button, one relay will turn on;
2. Release the button, this relay will turn off.
Toggle Mode:
1. Press button “A”, relay “1” will turn on;
2. Press button “A” again, this relay “1” will turn off.
Latched mode:
1. Press button “A”, relay “1” will turn on;
2. Press button “B”, relay “2” will turn on, at the same time relay “1” will turn off.
Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset all the remote controls cannot work anymore.
Setup
1. Press the learning button (1 time for Momentary mode, 2 times for Toggle mode, 3 times for Latched mode). Wait for 3 seconds;
2. Press button “A” . Succeed.
Note: This item has already been set up in toggle mode. If you want to change the operation mode please reset firstly.

✉ For any inquiries, please reach out via the eBay messaging system. We aim to respond within 24 hours.
🌟 We value your feedback and strive to earn your trust. If you're not satisfied with your purchase, please contact us and we'll work to resolve the issue.
- We offer a 30-day return policy.
- If the item is defective or you are not satisfied, contact us for a replacement or refund.
- All returns must be sent to the address provided upon contacting us.