Includes left front bracket (indicated by arrows on the first photo). Doesn't include bracket locking pins.

*If you're interested in the other coupe brackets, please view our other product ads.

Fits BMW e36 coupe or convertible 3 series models.
Throw out those broken E36 coupe door card brackets, now we have the aftermarket solution. Allowing you to either put back on that set of door cards you didn't have the brackets for or refurbish another a set.
Designed with industrial grade 3D scanning and software tools, fabricated with industrial grade 3D printers. These are not made out of "cheap plastic". Considering we are restricted by the OEM design thickness. We are using Nylon 12 inlayed with carbon fibre to compensate. With material properties of insane tensile strength, highly resistant against humidity and can withstand almost 200 deg celcius of heat deflection. This is a definite upgrade from the OEM ABS plastic brackets.

They come pre-assembled with a joining tab design.

Installation Instructions:
- Install door brackets onto the door pin slots.
- Apply glue to the door card bracket (E6000, or similar). It is recommended to install masking tape below the bracket, on the lip of the door panel, in order to protect it from any dripping adhesive. *We recommend installing this way instead of glueing the brackets to the door card first as sometimes getting all the pins to lock is difficult.*
- Mount the door panel on the bracket, and attach enough additional soft vice grips to hold the door panel secure to the door as the glue dries.