eBay

Information

Name	Multi-Turn Potentiometer
Type	Multiple laps
Purpose	Precision
Material	Wire Wound
Performance	Fine Tuning
Organizational Changes	D-Shaped, Exponential
Rated Power	2W
Permissible Deviation of Resistance Value	± 5%
Temperature Environment	-55℃ ~ 100℃
Relative Temperature	Reaches 90% At A Temperature Of+40 ℃
Atmospheric Pressure	107~4.4Kpa
Vibrate	The seismic frequency is 10-500Hz, and the acceleration is 49m/s2
Collision	The Frequency Is 40-80 Times/Minute, And The Acceleration Is 147/ms2
Centrifugal	Acceleration 147m/s2

Technical Conditions: Electrical strength: withstand 750 Å (50HZ AC effective value) for One Minute Without Breakdown or Arcing Phenomenon.
Insulation Resistance: ≥ 200MΩ before moisture, ≥ 20MΩ after moisture.
Rotating Torque: 50-500gfcm, with a torque ratio of 1:3.
Wear Resistance Level: Level 3 for 10000 cycles and Level 4 for 5000 cycles.
Constant Tidal Heat: 40 ± 2 ° C, relative humidity 90 ± 3%, after 96 hours, Δ R/R does not exceed ± 1.
Electrical Load: After 48 hours of rated power load, Δ R/R shall not exceed 1%.

WXD3-13 is a Precision Multi Turn, (10 Turn) Wire Wound Potentiometer with a Power of 2W. This Product Is Used in Telecommunications, Electricians, Electronic Instruments and Equipment, Switchable Cabinets, and Precision Adjustment of Dc or Low-frequency Voltage and Current.

Potentiometer Is Made of High-quality Nickel-plated Alloy Shaft,Easy to Weld Alloy Pins and Flame Retardant.knurled Shaft with Split Design for Push-on Knob.（This Item Do Not Include Knobs)

Mainly Used in Fields Such As Potentiometer Instruments, Postal and Telecommunications, Power Equipment, Railway Signaling, Aerospace, Etc.

Used As a Voltage Divider: a Potentiometer Is a Continuously Adjustable Resistor That Slides on the Resistor Body When Adjusting the Rotary or Sliding Handle of the Potentiometer. at This Point, an Output Voltage That Is Related to the Applied Voltage of the Potentiometer and the Angle or Stroke of the Movable Arm Can Be Obtained at the Output End of the Potentiometer.

Used As a Variable Resistor: When a Potentiometer Is Used As a Variable Resistor, It Should Be Connected to Two End Devices, so That a Smooth and Continuous Change in Resistance Value Can Be Obtained Within the Travel Range of the Potentiometer.

Used As a Current Controller: When a Potentiometer Is Used As a Current Controller, One of the Selected Current Output Terminals Must Be a Sliding Contact Lead out Terminal.

Package Including:

WXD3-13-2W Multiturn Wirewound Potentiometer X According to your choice .

Payment:

We accept Paypal only, It is fast, Easy and Safe.

Payment must be completed within 7 days.

PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.

Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.

Shipping:

We Ship to Worldwide.

Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that's why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed.

We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address.

Package to USA will Shipping by E-Package with Tracking Number(7-15 Days to Delived). To other Countries will shipping by Post Air Mail without tracking number(ONLY when the order is over 20USD will supply Tracking Number Shipping Way!)(15-35 Days to Delived)

Items are shipped via China Post Air Mail.

Guarantee:

Good Good quality. Buy with confidence!

If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.

Not accept returning of electronic components.

Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.