Upgrade 3LED Pre-Runner Style LED Grill Light Kit for Jeep Wrangler JL JLU 2018+

1.Compatibility: Perfectly fit for Jeep Wrangler JL JLU Sport Sahara Freedom Rubicon 2-Door and 4-Door 2018 2019 2020 2021 2022 .(NOTE: NOT fit for Jeep Wrangler JK and Gladiator JT)

2.Material: The three waterproof LED marker lights and custom wiring harness are made of high quality copper core with plastic jacket, professional design, brighter lighting for the front end of the vehicle, safer driving for your trip.

3.Upgrade: These kit adds 3 super bright 3-watt LED lights to the factory grill insert that comes standard with each JL, provides a cool, unique and fashion style for your car. Also they can be connected to your parking lights, daytime running lights or auxiliary switches.

4.Installation: No cutting or drilling required. Just take minutes to install it into the holes of the grill. Using a plug-n-play system with offset cable lengths could reduce installation time, making cable management easier. Directly plugs the included custom harness into the left marker light to power the unit when the marker light is on.

5.Satisfaction Guarantee: If you're not 100% satisfied with our products, simply return it in 60 days for a full refund, with unconditional refund guarantee and 12-month warranty.

INSTALLATION GUIDE

1. Put on safety glasses.Open the hood of your car. Out the prop rod into the correct spot to hold hood open.

2. Locate the six plastic fasteners that secure the front grille to the upper body support.

3. Pry up the plastic fasteners (6 total)using a small flat blade screwdriver. First remove the center, then removethe body of each plastic retainer. Set rivets aside in a safe place for re-installing the grille.

4. Gently tilt the grille forward and then gently pop the lower portion of grillefrom its (8) retaining clips.

5. Locate the"T"end of the new light wiring harness.

6. Fish it through the rubber barrier on the driver side of the radiator as shown.

7. Route the wiring harness behind the headlight and past the reservoir, towards the firewall on the driver's side.

8. Locate the drivers side fender flare lamp harness connector by looking from underneath the wheel well.

9. Slide the red locking tab backwards and disconnect the plug.

10. Then, plugin the new Tee harness to each side of the OEM harness until you hear a click and then push the red and gray locking tabs to lock the connections.

11. Locate the 2nd,4th and 6th slots in the grill as shown.

12. Then, locate the3rd horizontal support in the middle of the 2nd slot grill insert. The next step is to locate and cut the 4 angled supports for this horizontal support.

13. Carefully make the cuts with your side cutters / diagonal cutters.

14. Repeat these steps in the 4th, and 6th slot grille inserts.

15. Grille depicted with all three inserts cut.

16. Separate the grommet from the LED light on the harness and pass both the grommet and light through the hole in the 2nd grill slot.

17. Push the grommet into the hole in the grill insert.

18. Push the LED light into the grommet to set the light into the grill insert.

19. Repeat on the other two grille slots and secure the harness appropriately with the provided cable ties.

20. Finally, reinstall the Grille assembly in reverse order of the steps to remove it.

Package Includes:

1* Upgraded Pre-Runner Style LED Grille Light Kit

Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

1.Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.

2.All of the items are shipped from our Warehouse in USA.

1. Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days.

2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.

If you have any questions, please feel free to email our service specialists 24 Hours a Day, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.

Please note that our product is an aftermarket product (non-OEM). The parts we offer in this listing are an O.E. alternative; they are not produced by O.E. Manufacturers. All names, numbers, symbols and descriptions are used for reference purposes only. If you mind, please do not place an order.

Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.