Power supply

AC100 - 240V 4.5 - 1.8A 50Hz/60Hz

Power consumption

400W

Power consumption | Standby Mode (Eco)

0.5W, 0.3W (Taiwan)

Power consumption | Standby Mode (Normal)

12W

Power consumption | Standby Mode (Normal and Audio monitor out)

30W

BTU value

Max 1,365 BTU

LCD panel | Panel size

16.3 mm (0.64 in) diagonal (16:10 aspect ratio)

LCD panel | Display method

Transparent LCD panel (x 3, R/G/B)

LCD panel | Drive method

Active matrix

LCD panel | Pixels

1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels

LENS

Manual zoom (throw ratio 1.22-2.26:1),
Manual focus, F 1.6-2.2, f 17.1-31.7 mm

Lamp

270 W UHM lamp
Lamp replacement cycle
6,000 hours (lamp power: Normal), 8,000 hours (lamp power: Eco)
This is the maximum value when the lamp is turned on for 2 hours
and off for 0.25 hours.

Screen size

1.02- 7.62 m (40-300 inches) (16:10 aspect ratio)

Brightness

4,500 lumens
(Lamp power: Normal, Dynamic mode, Iris off, Daylight View:off, Auto Power Save:off)

Center-to-corner uniformity

90%

Contrast

10,000:1
(Lamp power: Normal, Dynamic mode, Iris on, Daylight View:off, Auto Power Save:off)

Resolution

1,280 x 800 pixels

Scanning frequency | HDMI/DIGITAL LINK

fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 25 - 162 MHz

Scanning frequency | RGB

fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 162 MHz or lower

Scanning frequency | YPBPR (YCBCR)

525i (480i): fH15.73 kHz; fV59.94 Hz,
625i (576i): fH15.63 kHz; fV50 Hz,
525p (480p): fH31.47 kHz; fV60 Hz,
625p (576p): fH31.25 kHz; fV50 Hz,
750 (720)/60p: fH45.00 kHz; fV60 Hz,
750 (720)/50p: fH37.50 kHz; fV50 Hz,
1125 (1080)/60i: fH33.75 kHz; fV60 Hz,
1125 (1080)/50i: fH28.13 kHz; fV50 Hz,
1125 (1080)/25p: fH28.13 kHz; fV25 Hz,
1125 (1080)/24p: fH27.00 kHz; fV24 Hz,
1125 (1080)/24sF: fH27.00 kHz; fV48 Hz,
1125 (1080)/30p: fH33.75 kHz; fV30 Hz,
1125 (1080)/60p: fH67.50 kHz; fV60 Hz,
1125 (1080)/50p: fH56.25 kHz; fV50 Hz

Scanning frequency | Video/S-Video

fH: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

Keystone correction range

Vertical ±35°, horizontal ±35°

Optical axis shift

Vertical: ±60% (Manual) Horizontal: ±30% (Manual)

Installation

Ceiling/fl・or, front/rear

Speaker

4.0 cm (1-9/16 in) 10W (monaural) x 1

Terminals | HDMI In 1/HDMI In 2 | HDMI 19-Pin x2

Deep Color, compatible with HDCP,
Audio signal: linear PCM
(sampling frequencies: 48 kHz, 44.1 kHz, 32 kH z)

Terminals | COMPUTER 1 IN

D-sub HD 15-pin (female) x 1

Terminals | COMPUTER 1 IN | R, G, B

0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
H D/VD, SYNC: TTL, high impedance, positive/negative automatic

Terminals | Computer 1 IN | Y, PB, PR (Y, CB, CR)

Y: 1.0 Vp-p (including sync signal),
PBPR(CBCR): 0.7 Vp-p, 75 ohms

Terminals | Computer 1 IN | Y/C

Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms

Terminals | COMPUTER 2 IN/COMPUTER 1 OUT

D-sub HD 15-pin (female) x 1

Terminals | COMPUTER 2 IN/COMPUTER 1 OUT | R,G,B

0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
H D/VD, SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Terminals | COMPUTER 2 IN/COMPUTER 1 OUT | Y, PB, PR (Y, CB, CR)

Y:1.0 Vp-p (including sync signal),
PBPR(CBCR): 0.7 Vp-p, 75 ohms

Terminals | VIDEO IN

Pin jack x 1, 1.0 Vp-p, 75 ohms

Terminals | AUDIO IN 1/AUDIO IN 2

M3 x 2, 0.5 Vrms, input impedance: 22 kilohms or more

Terminals | AUDIO IN 3

Pin jack(L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more

Terminals | VARIABLE AUDIO OUT

M3 x 1 (monitor out, stereo)
0-2.0 Vrms, variable, output impedance: 2.2 kilohms or less

Terminals | SERIAL IN

D-sub 9 p x 1, for external control (RS-232C compliant)

Terminals | DIGITAL LINK/LAN

RJ-45 x 1 (HDBaseT? compatible), 100Base-TX, PJLink?(Class 1),
Deep Color, compatible with HDCP
A udio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

Terminals | LAN

RJ-45 x 1 for network connection 10Base-T/100Base-TX,
compatible with Art-Net, PJLink?(Class 1)

Terminals | WIRELESS

USB Type A x 1, for wireless projection with optional dongle (ET-WML100)

Terminals | DC OUT

USB Type A x 1, for power supply (DC5 V, max 900 mA)

Power cord length

2.0 m (6 ft7 in)

Cabinet materials

Molded plastic

Dimensions (W x H x D)

498 x 145 x 398.3mm
(19-19/32 x 5-11/16 x 15-11/16 in ) with supplied lens

Weight

Approx. 7.9kg (17.4lbs)

Operating noise

29 dB (Eco), 33 dB (Normal)

Operating environment | Operating temperature

0-40 °C (32-104 °F)

Operating environment | Operating humidity

20%-80% (no condensation)

Technology

LCD