AC DC Clamp Current Meter Ammeter with Extra Large Caliber DC Range 0.0A～2000A
Overview:
This Super Large Caliber AC/DC Clamp Current Meter suitable for measuring AC/DC leakage current below 600V, range: AC0.0A~1000A，DC0.0A~2000A, CT size: 108mmx148mm, can clamp to test Φ108mm cable and 160mm×4mm flat steel ground wire, adopt non-contact current measurement, safe and simple operation.The instrument is small size, high accuracy, performance stable and function perfect, which is one of the necessary tools for electrician safety inspection and maintenance.
The instrument with data hold, data storage and other functions, can store 99 groups of data, the instrument connect computer by RS232 interface, stotage data can be uploaded to the computer, easy to read, analysis, save, print and so on.
Specification：
Technical Parameters
Function | Description |
Function | Measurement of DC,AC current , peak current hold, online monitoring |
Power Supply | DC 6V （1.5V x 4） |
Clamp Size | 148mmx108mm(can clamp φ108mmcable or160mm×4mm flat cable or steel flat ground cable) |
Range | AC 0.0A～1000A |
DC 0.0A～2000A | |
Resolution | 0.1A DC/AC |
Accuracy (Reference condition) | 0.0A～999A: ±2%±5dgt |
1000A～1499A: ±3%±5dgt | |
1500A～2000A: ±4%±5dgt | |
Reference Condition | 23℃±3℃，below 75%rh，The conductor is at the center of the clamp |
Frequency response | AC：45Hz～400Hz |
Sampling Rate | 2 times/second |
Measurement method | Clamp CT，Non-contact measurement |
Tested Conductor Position | The detected conductor is in the center position of the clamp , and the deviation from the center position increases the maximum by 2%rdg |
Display Mode | 4 digital LCD display |
Meter Dimension | 350mm(L)×180mm(W)×55mm(H) |
LCD Size | 47mm×28.5mm |
Polarity indication | In DC current test auto identified and display“—” symbol |
Shift | Automatic |
Line voltage | Below 600V circuit test |
Software | Yes, storage data of meter can be uploaded to computer by software |
USB Interface | With USB interface, storage data can be uploaded to computer, software monitoring, USB cable length: 1.5m |
Data Storage | 99units, flash display “FULL” symbol indicate storage full |
USB Cable Length | 1.5M |
Data Storage | 99 groups, flash display “FULL” symbol indicate storage full |
Peak Hold | Peak value capture and hold function, long press HOLD key display peak value |
Data Hold | Data hold function: "HOLD" symbol display |
Overflow Display | Exceed measure range overflow function: "OL" symbol display |
Automatic Shutdown | 5 Minutes after power on will shutdown automatically without any operation, to reduce battery consumption |
Battery Voltage | When battery voltage lower than 4.6V, low battery voltage symbol will display, and remind to replace the battery |
Weight | Meter:1.5kg; Package: 2.6kg (include accessories) |
Working Current | 20mA |
Working Environment | -10℃~40℃；below 80%rh |
Store Environment | -10℃~60℃；below 70%rh |
Insulation Strengh | AC 3700kV/rms(Between backcover screw and shell) |
Suitable Safe Standard | IEC1010-1、IEC1010-2-032、Pollution 2、CAT Ⅲ(600V) |
Relate Model：
Note： Batteries are not included during shipping！！！
| Package | Outer Package | Carton |
| Inner Package | Aluminum case | |
| Accessory | Meter | 1 PCS |
| Data software/ USB Communication cable | 1 SET | |
| Package case | 1 PCS | |
| Manual | 1 PCS | |
| Certification | 1 PCS | |
| Warranty Card | 1 PCS |