Introducing the Trailing Arm Protectors Can-Am, the ultimate solution for your off-road adventures. Crafted from high-strength 5052 H32 aluminum, these body frame protectors are engineered to withstand the toughest terrains, ensuring your ATV remains in peak condition. Say goodbye to flimsy stock plastic protectors and embrace the durability and reliability of our aluminum plates. Sold in pairs, these protectors are a must-have for any Can-Am enthusiast looking to conquer rugged landscapes with confidence. Elevate your ride and protect your investment like a true trailblazer.  Shield your ride with these rugged aluminum plates! Upgrade from plastic and conquer any terrain. Tough, durable, and ready for adventure.

Fits with product:

Model year:

Can-Am

Outlander 500 (G2) 2013 - 2015

Outlander 570 (G2) 2016 - 2017

Outlander 650 (G2) 2013 - 2016

Outlander 800 (G2) 2015

Outlander 1000 (G2) 2013 - 2016

Outlander MAX 500 (G2) 2013 - 2014

Outlander MAX 570 (G2) 2016

Outlander MAX 570 (G2L) 2017

Outlander MAX 650 (G2) 2013 - 2016

Outlander MAX 800 (G2) 2010 - 2015

Outlander MAX 850 (G2) 2016

Outlander MAX 1000 (G2) 2013 - 2016

Outlander 6x6 650 (G2) 2015 - 2016

Outlander 6x6 1000 (G2) 2014 - 2016

Renegade 1000 (G2S) 2013 - 2016

Renegade 500 (G2S) 2015

Renegade 570 (G2S) 2016

Renegade 800 (G2S) 2015

Renegade 850 (G2S) 2016


  • Our Aluminum Plates are made with high strength 5052 H32 aluminum.
  • A must-have for rugged terrains.
  • Replace stock plastic protectors.
  • Sold in pairs.

MSRP is $159.00

Product:ATV
Project no:
487802664
Instruction Sheet P/N:487802664
Revision no: 
Revision date: 
Item covered:Aluminium trailing arm protectors

 
The following symbols may be used in this document:
WarningWARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazard situation which, if not avoided, could result in minor or moderate injury.
  NOTICE     Indicates an instruction which, if not followed, could severely damage vehicle components or other property.
WarningWARNING
- For safety reasons, this kit must be installed by an authorized BRP dealer.
- This kit is designed for specific applicable models only (authorized BRP dealers will confirm model(s)). It is not recommended for units other than the one (those) for which it was sold.
- If the installation of the kit requires a template, ensure template is to scale.
- Should removal of a locking device (e.g. lock tabs, self-locking fasteners, etc.) be required when undergoing disassembly/ assembly, always replace with a new one.
- Torque wrench tightening specifications must strictly be adhered to.
- Always wear EYE PROTECTION AND APPROPRIATE GLOVES when using power tools.
- Unless otherwise specified, engine must be OFF when performing any operation on the vehicle.
- Always be aware of parts that can move, such as wheels, transmission components, etc.
- Some components may be HOT. Always wait for engine to cool down before performing work.
WarningWARNING
Some important safety information and/or operating instructions dedicated to the end user might be included in this instruction sheet. Make sure to give the kit part number as well as the instruction sheet included with this kit to the customer. Verify that the customer has access to all the information required for proper use of the accessory.
NOTE: USE TIGHTENING TORQUES IN THE FOLLOWING TABLE IF NOT OTHERWISE SPECIFIED.
 GRADE
5.88.810.912.9
M41.8 ± 0.2  N•m (16  ± 2 lbf•in)2.8 ± 0.2  N•m (25  ± 2 lbf•in)3.8 ± 0.2  N•m (34  ± 2 lbf•in)4.5 ± 0.5  N•m (40  ± 4 lbf•in)
M53.3 ± 0.2  N•m (29  ± 2 lbf•in)5 ± 0.5  N•m (44  ± 4 lbf•in)7.8 ± 0.7  N•m (69  ± 6 lbf•in)9 ± 1  N•m (80  ± 9 lbf•in)
M67.5 ± 1  N•m (66  ± 9 lbf•in)10 ± 2  N•m (89  ± 18 lbf•in)12.8 ± 2.2  N•m (113  ± 19 lbf•in)16 ± 2  N•m (142  ± 18 lbf•in)
M815.3 ± 1.7  N•m (135  ± 15 lbf•in)24.5 ± 3.5  N•m (18  ± 3 lbf•ft)31.5 ± 3.5  N•m (23  ± 3 lbf•ft)40 ± 5  N•m (30  ± 4 lbf•ft)
M1029 ± 3  N•m (21  ± 2 lbf•ft)48 ± 6  N•m (35  ± 4 lbf•ft)61 ± 9  N•m (45  ± 7 lbf•ft)73 ± 7  N•m (54  ± 5 lbf•ft)
M1252 ± 6  N•m (38  ± 4 lbf•ft)85 ± 10  N•m (63  ± 7 lbf•ft)105 ± 15  N•m (77  ± 11 lbf•ft)128 ± 17  N•m (94  ± 13 lbf•ft)
M1485 ± 10  N•m (63  ± 7 lbf•ft)135 ± 15  N•m (100  ± 11 lbf•ft)170 ± 20  N•m (125  ± 15 lbf•ft)200 ± 25  N•m (148  ± 18 lbf•ft)
M16126 ± 14  N•m (93  ± 10 lbf•ft)205 ± 25  N•m (151  ± 18 lbf•ft)255 ± 30  N•m (188  ± 22 lbf•ft)305 ± 35  N•m (225  ± 26 lbf•ft)
M18170 ± 20  N•m (125  ± 15 lbf•ft)273 ± 32  N•m (201  ± 24 lbf•ft)330 ± 25  N•m (243  ± 18 lbf•ft)413 ± 47  N•m (305  ± 35 lbf•ft)
The illustrations in this document show typical construction of the different assemblies and may not reproduce the full detail or exact shape of the parts; however, they represent parts that have the same or similar function.
Installation time is approximately 0.25 hour.
icon legend
Iconindicates
Parts to be Discarded
parts to be installed
ITEMDESCRIPTIONPart numberQTY
P1Rear left arm protector assembly7060031321
P2Rear left arm protector7060031341
P3Left flexible protector7062011851
P4Rear right arm protector assembly7060031331
P5Rear right arm protector7060031351
P6Right flexible protector7062011861
P73/16" Pop rivet2931501044
P8M6 X 12 Torx screw2500007676
instructions
NOTE: LH side shown, repeat for RH side.
NOTE: Some parts are removed for clarity purpose. Removing the wheel is not required to install this kit.
Part pre-assembly
Assemble rear left arm protector [P2] with left flexible protector [P3] using two (2) 3/16" pop rivet [P7].
1. Rear left arm protector [P2]
2. Left flexible protector [P3]
3. 3/16" Pop rivet [P7]
Vehicule preparation
1. Remove and discard the three (3) M6 X 16 screws and washers under the protector.
1.  M6 X 16 screws and washers
2. Old protector
Part Installation
Place rear left arm protector assembly [P1] and secure it with a M6 X 12 Torx screw [P8] in the nearest hole to the wheel.
tightening torque
M6 X 12 Torx screw [P8]10 ± 2  N•m (88.5  ± 17.7 lbf•in)
1. M6 X 25 Torx screws [P8]
2. Rear left arm protector assembly [P1]
Insert and tighten two (2) M6 X 12 Torx screws [P8] in remaining hole on rear left arm protector assembly[P1].
tightening torque
M6 X 12 Torx screws [P8]10 ± 2  N•m (88.5  ± 17.7 lbf•in)
1. Two (2) M6 X 12 Torx screw [P8]
2. Rear left arm protector assembly [P1]


NEW DEALER STOCK SURPLUS

GET IT CHEAPER HERE!

***** Please check with your dealer or online for fitment of other years/models AND READ ALL OF THIS INFORMATION BEFORE BUYING.  BUYING MEANS THAT YOU HAVE READ AND FULLY AGREE TO ALL INFORMATION IN THIS LISTING.***** 

 

EBay Store: Check out our eBay store: https://www.ebay.com/str/rhodeandtrailrunnersmotorsports

Contact Us: If you have any questions or concerns, please contact us by clicking the "Contact Seller" link.

About Us: We are a seller of all thing’s OEM motorsport: "Accuracy, Honesty, Quality, Value and Integrity"

Purchasing Policy: EBay collects sales tax on all orders based on your location, and remits it to your state. We require a payment to place an order. We only accept eBay payments or PayPal payments for eBay purchases. We are not responsible for buyer mistakes!

 

Items are sold as described, As Is Where As.  Some have generic pictures to demonstrate the use, but all have a specific picture of the actual item.  Brand new items are not opened and specifics such as color MUST be confirmed by using the part number supplied.  Please be sure to read the condition description and look at ALL photos.  If our description does not match the eBay ad or you are unsure, please CONTACT US FIRST. 

Shipping:

You must call to notify us of any special shipping requests, otherwise your package will ship within 3 business days. We are not liable for delays that are out of our control, such as weather, disasters, CUSTOMS, shipper logistic or other events after the item is placed with the shipper.

All packages include $100 Canadian insurance and you must contact us if you would like to add insurance at the rate of $3.00 per $100.  Any claim is only processed through Canada Post and any payment is in Canadian funds. We are not liable for un-insured, under-insured packages that get lost or damaged. Un-insured or under-insured packages are the liability of the buyer.  

We only use Canada Post as our main shipping carrier and all items are shipped from CANADA.  Shipping timelines are ESTIMATES only and are not GAURUNTEED SHIPPING DELIVERY TIMES. Tracking number will be provided.   Shipping costs have significantly inflated for various reasons, this is just a basic fact.  We charge a flat rate what the average shipping costs us.

International Shipping: We welcome international customers outside of Canada and the Continental USA to purchase our items. If you do not see a shipping quote to your country, please contact us and we will provide you with one. You must provide us with a correct shipping address in English upon purchasing an item. If your package is returned to us because it was undeliverable, only the purchase price of the item(s) will be refunded. The cost of shipping will not be refunded to you. Taxes, duties, brokerage fees, and customs fees on items shipped internationally are the responsibility of the buyer, they are not included in the sale or shipping price.

 

Return Policy-There are no returns, unless by seller error. Example: the wrong size was sent and any return requires prior authorization with an RMA (Return Merchandise Authorization) #. Please initiate an eBay return to receive an RMA #. Any returns without an RMA # will not be processed.

 

• Item must be in original condition & packaging with all tags attached. 

 

• Any items that are open, used, worn, contain smoke odor, pet hair or anything not in the original condition will NOT be accepted. 

 

• Use of the manufacturer's product packaging for a shipping container will result in a 50% restocking fee (the product's packaging must be kept in new condition).

 

• We do NOT pay for shipping on exchanged items to us & back to you.

 

• All items shipped to us must use a traceable means of shipment for your returned items as we are not liable for items lost or damaged in transit.

 

• All unaccepted returns can be shipped back at the customers’ expense or they will be abandoned with no refund.

 

• Original shipping charges are non-refundable.

 

Feedback & Satisfaction: If the item is absolutely not as described, please contact us before leaving feedback or detailed seller ratings. We strive for positive feedback and 5-star detailed seller ratings for each and every sale. We want to provide you, the buyer, with the best products possible, please contact us at any time with your concerns.