This Low Frequency Signal Generator is a professional product to generate sine///forward and reverse sawtooth . 

Features:

Output Waveform: can output sine , , , forward sawtooth , reverse sawtooth , electrocardiogram , noise . High- .

Current: 160mA when the voltage is 5V.

DDS Frequency : sine 1Hz-500kHz (the output amplitude will decrease with the further increase of frequency), other waveforms 1Hz-100kHz (but the upper limit of adjustable frequency is not limited, if the distortion and shaking requirements are not high, use the frequency can be further increased).

High- frequency (HS) output to 16MHz, Can choose 1MHZ, 2MHZ, 4MHZ, 8MHZ, 16MHZ.

DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers.

All setting parameters can be saved, the will restore the last used configuration automatically.

Can section into the value: 1, 10, 100, 1000, 10000Hz.

Comes with an USB cable for power .

LCD display to indicate the data accurately.

Specifications:

Material: FR4 + Acrylic

Operating Voltage: DC4~10V

DDS Frequency : 1Hz-500kHz

Resolution: 1Hz

Sine Distortion: <1% below 1kHz, <0.5% above 1kHz

Output Amplitude: maximum ±10V (P-P)

Output Impedance: 50ohms

Offset: maximum ±10V

Item Size: Approx. 12 * 8.5 * 3.2cm / 4.72 * 3.35 * 1.26in

Item Weight: 147g / 5.19oz

Package Size: Approx. 16 * 11 * 5cm / 6.30 * 4.33 * 1.97in

Package Weight: 272g / 9.59oz

Note:

The instrument will be damaged if the voltage is higher than 10V. 

Package List: E4118-1

1 * Signal Generator 

1 * Clip Test Line

1 * USB Cable

1 * User Manual(English)