Picture #1 shows the empty panels  
Picture #2 choose the color options

Please send us an ebay message after buying the item following this format:
Panel 1: Material ____________ Color __________
Panel 2: Material ____________ Color __________
Panel 3: Material ____________ Color __________
Panel 4: Material ____________ Color __________

COLOR AND MATERIAL CHOICES

Vinyl color choices:
Black, Deep Blue, Royal Blue, Teal, Burgundy, Gray, Dark Gray, Dark Green, Lime Green, Purple, Red, White, Yellow, Orange and pink.

Carbon-Fiber color choices:
Black, Silver, Purple, White, Copper, Dark Gray, Yellow, Blue and Red.

Non Slip Material available in Black.

Please note all seat covers are custom made to suit your specific color and material. There are no refunds or exchanges so please make sure to order correctly.

BlackTip Jetsports Seat Cover Color Samples may view differently than actual color, depending on monitor settings.

This is a customized item and manufacture takes up to 4-6 days.
BUILD AS PER YOUR CUSTOMIZATION. NO RETURNS OR EXCHANGES.
Manufacturing takes 4-6 days

Description: New Black Tip Custom Cut Seat Cover. Add that custom look for a very reasonable price using one of our many choices of color, fabric and design.The cover is made from high quality marine vinyl and designed to last for years. The individual section provides for a tight, custom fit and look.

Fits:
1990 GT
1991 GT

1992 GTX
1993 GTX
1994 GTX
1995 GTX

1992 GTS
1993 GTS
1994 GTS
1995 GTS
1996 GTS
1997 GTS
1998 GTS
1999 GTS
2000 GTS

1996 GTI

SBT Code: 108BT102 
Brand: BlackTip Jetsports

SBT is the largest remanufacturer of PWC engines in the world. The name SBT is known as manufacturer of top of the line PWC and Jet Boat parts. Their facilities include manufacturing, research & Development, and testing. SBT is pride in their testing procedures that makes SBT parts so reliable and set them apart from the competition. For quality and durability remember the name SBT.

INSTALLATION:
Installation of your new seat cover is easy and can be done by most do it yourselfers. Listed below are the tools and supplies you will need:

Staple Gun (preferably electric or air powered)
Stainless Steel staples to fit your gun
Needle nose pliers
Flat blade screwdriver or other type of tool to pry out staples
Scissors
Utility knife
Some seats have straps, handles, or brackets they may require additional tools for removal.

Most BlackTip Jetsports seat covers are designed to install over your factory cover. The old cover may need to be removed or sections of it removed if it is torn or damaged. If the original is badly damaged or the seat foam is wet you should remove it completely and let the foam dry before installing the new cover.

If the foam is damaged you will need to repair it before installing the new cover or the damage will show through. Small cracks can usually be repaired with duct tape to hide the damage. Larger repairs can be made by replacing the damaged foam and then sanding the new foam to match the shape of the old foam. If your seat has extensive damage we recommend taking it and your new cover to a local upholstery shop.

Installation of the cover is easiest if the vinyl is warm, a nice sunny day, a warm shop, or a hair dryer can accomplish this. Make sure you do not have any sharp corner or protrusions before installing.

Align the cover onto the seat so that it is centered over the main section of the seat. Put a staple at each corner or curve including the front of the seat (these staples may need to be removed later as you stretch the material into place). Once you have the material aligned you can continue stretching and fitting the cover around the seat. As you staple and stretch it may be necessary to trim away excess material. You will want to use many staples around the perimeter of the seat use the original as your guide. After the cover is completely stapled in place you should trim away any excess material.

On some models with a strap you can reinstall the strap at this time if you prefer.

CLEANING:
Cleaning and Maintenance of the seat cover should be done periodically to help extend the life of the cover. To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush. You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.

Need more info? Ask a question. We will answer questions quickly.