Made in the UK and shipped from the UK unlike many others beware of what you are buying, not all solution is safe.

You dont need gallons of the stuff if its the right stuff, just a small amount goes a very long way.

This is Concentrated Solution, it is not watered down or packed in larger bottles to make you think bigger is better, instead we can ship it cheaper and pass this saving on to you.

Buy from The IT Exchange Ltd - a Real Printer Repair Company based in Stoke-on-Trent.

We dont drop ship or Import from China, we make it ourselves.  This is the biggest difference between us and other sellers, get real technical support from real people not Ai or online chat bots, we have telephones we answer mon-fri 9.00am - 4.30pm.

Specially formulated for the Epson Workforce home user printers where sending to a repair shop my not be economically viable.

*** Your Print Head needs to be the same as the one in the picture or it wont fit. have a look under the ink cartridges before ordering ***

1 Bottle Kit 

 Includes: 1 x Solution,1 x Syringe, adapter in picture, pair gloves, paper towel, and instructions.

No returns for opened or used kits, as this is not hygienic, they cannot be resold, this is to protect the customer so they know they are getting a guaranteed brand new product every time they order.  It is easy to check if this fits your model.

Check your model - click ask seller a question

Background information.

Newer printers print in higher quality so the nozzles become smaller, newer printers are usually faster than their predecessors, and therefore the ink needs to dry faster.  This combination is why your nozzles can become blocked whether the printer is 1 month old or 24 months old.

When you replace your cartridge, you notice a problem with your print quality, so you peform a nozzle check, noticing there are a few missing lines you perform a nozzle clean cycle on your printer, this fires ink through all the nozzles and then physically wipes the head on an internal rubber strip.  Hey presto your printer is printing as it should again.  However sometimes head cleans can make the problem worse, the more cleans you do the more waste ink is smeared over the head, and all this ink has to go somewhere, Performing one or two head cleans should be enough you should never perform more than three sequentially, as not only will this empty your inks but it will fill your waste catcher over the service station with lots of waste ink and more than likely your yellow will become darkened as it sits over the waste ink in the printer.

Running these cleans can deplete your ink cartridge, so you may need to replace them sooner than necessary costing you more money in cartridges, just because your cyan is blocked doesnt mean thats the only ink being used in the cleaning cycle, it uses all of the ink cartridges not matter whether they are ok or not.

Sometimes you may wait until your ink completely runs out rather than replacing it when it shows low, at this point there is no ink left in the nozzles and they will become filled with air, air will block the natural flow of the ink through all of the nozzles and it will take the path of least resistance which may cause it to miss a few lines in your printout, much clearer seen on a nozzle check pattern.  All is not lost though, when you insert a new cartridge, the printer will self charge, this is the printers way of trying to force through any air and any dried ink, however effective this might be there can be more stubborn nozzles that will stay blocked.

Things that may help your printers nozzles are.

1. Never run more than three cleaning cycles, if it is not printing correctly after this you will need to manually clean the printheads.
2. Try to print something once a week, this will keep the ink from drying out in the nozzles,
3. Dont be afraid to turn your printer off and on again, when you printer is turned on it does a small cleaning cycle much less harsh than the one on the menus.
4. Use good quality inks, whether these are genuine or compatible, the ink quality must be good as any large particles in the cartridge will only get stuck in your head.

If your nozzles are blocked then our kit could help you, the instructions for it are listed below.

Everything is included in the kit for you to perform a manual clean of your printers head.

Instructions for use:

1.Run Nozzle check

2.Remove ink cartridges (& printhead if possible)

3.Inject 2ml PM solution into effected nozzle.

4.Leave for 5-10 mins

5.Change blotting/catcher paper.

6.Inject another 2ml PM solution.

7.Reinstall printhead if removed, and use fresh catridges.

8.Run Nozzle check

more hints and tips in the kit !!

Please take care using this solution, as damage to your printer can be done if spillage or splashes occur over moving parts or electronics, wipe dry immediately, and make sure the power is disconnected from your printer at all times. Wear gloves and goggles at all times.

WE TRY OUR BEST TO DESPATCH SAMEDAY IF ORDERED BEFORE 3PM MON-FRI

For small items we use Royal Mail 24 or 48 medium items we use Hermes (2-3 days), Large items or Express shipping UKMail (next day) or other courier (regardless of whats stated at checkout)

Please understand that all of the items we list on ebay are also on our website and on other e-commerce sites, occasionally the item you purchase may have already been purchased from another site, in which case we will try and source a replacement immediately or refund your money in full within 48hrs if a replacement cannot be found.