|
|
|
|
|
|
|
|
|
|
|
|



Vehicle Fitment:
2016-2022 Honda Civic L4 2.0L
Details:
Rotation:CW
Amperage:135A
Pulley Class:SC7
Regulator:IR
Fan Type:IF
DENSO: 104211-3910
HONDA: 31100-5BA-A01,31100-5BA-A01RM,CSP91
LESTER: 11931
Package Include:
Note:
Please check the model and important parameters before purchase to avoid unnecessary after-sales problems, if you are not clear, please feel free to contact us, thank you for your cooperation!
Disassembly and assembly of alternator:
1. Disconnect the negative battery terminal cable Before disconnecting the negative battery terminal cable, make a record of the information stored in the ECU and other components, such as the DTC (diagnostic trouble code), radio channel selected, seat position (with memory system), steering wheel position (with memory system), etc.
2. Disconnect the generator power cord and connector
3. Disassemble the generator. Loosen the generator penetration bolts or tensioner pulleys, then remove the drive belt. Remove the generator fixing bolts.
1. Install the generator.
① Install the entire generator in reverse order of disassembly.
② Install the generator at the front end of the engine by penetrating bolts
③ Preliminary mounting bolts.
2. Install the drive belt.
① Install the drive belt.
② Adjust the belt tension by moving the generator with something like the handle of a hammer
③ Tighten the mounting penetration bolts and bolts after ensuring the deflection of the drive belt.
3. Connect the wiring harness.
① Generator cable and install the short-circuit-proof cover.




Picture Shop Category |
ECCPP New Alternator For 2016 2017 2018-2022 Honda Civic L4 2.0L 135A SC7
2016-2022 Honda Civic L4 2.0L
Rotation:CW Amperage:135A Pulley Class:SC7 Regulator:IR Fan Type:IF
DENSO: 104211-3910 HONDA: 31100-5BA-A01,31100-5BA-A01RM,CSP91 LESTER: 11931
Please check the model and important parameters before purchase to avoid unnecessary after-sales problems, if you are not clear, please feel free to contact us, thank you for your cooperation!
1. Disconnect the negative battery terminal cable Before disconnecting the negative battery terminal cable, make a record of the information stored in the ECU and other components, such as the DTC (diagnostic trouble code), radio channel selected, seat position (with memory system), steering wheel position (with memory system), etc. 2. Disconnect the generator power cord and connector 3. Disassemble the generator. Loosen the generator penetration bolts or tensioner pulleys, then remove the drive belt. Remove the generator fixing bolts.
1. Install the generator. ① Install the entire generator in reverse order of disassembly. ② Install the generator at the front end of the engine by penetrating bolts ③ Preliminary mounting bolts. 2. Install the drive belt. ① Install the drive belt. ② Adjust the belt tension by moving the generator with something like the handle of a hammer ③ Tighten the mounting penetration bolts and bolts after ensuring the deflection of the drive belt. 3. Connect the wiring harness. ① Generator cable and install the short-circuit-proof cover.
Copyright of eccppautoparts. All rights reserved. |