Schlage J Series J170LAS605RH Half Dummy Lock LaSalle Bright Brass Finish Schlage J Series J170LAS605RH Half Dummy Lock LaSalle Bright Brass Finish Schlage J170LAS605RH from the LaSalle Series, Polished Brass Single Dummy The Schlage J170LAS605RH Half Dummy Intrinsically Safe Bright Brass Finish is the perfect lock for all your security needs This J Series Lockset comes with a 5 pin cylinder, does require a latch If you would like this lock without a latch please see part number J170LAS605RH This Schlage J170LAS605RH Dexter safe lock comes from the LaSalle series; it is made of hardened steel and polished brass It has a half dummy, right handed lever in bright brass finish The Schlage J170LAS605RH is perfect for the outside of a door frame The J170LAS605RH is 75 inches thick, 2 inches deep and 4 1/4 inches wide You may wish to use different locking mechanisms on exterior doors and interior doors The Schlage J170LAS605RH is a half-dummy keyed entry lever lock that features a bright brass finish on the case The Schlage J Series lockset features both cylinder and lever operation, with the cylinder located on the deadbolt This provides the ability to lock or unlock the door from the outside without using a key, and lock the door from inside without using a key The Schlage J170LAS605RH comes with 5 pin cylinders instead of standard 6 pin cylinders to simplify rekeying, allowing you to pick any pin out of order The black e-drive design has Schlage J170LAS605RH J170-LAS-RH Schlage J170LAS605RH Single Dummy Right Handed Lever from the LaSalle Series, Polished Brass This Schlage Single Cylinder Dummy J170LAS605RH is from the LaSalle Series in a polished brass finish It has an ANSI/BHMA Grade 2 security rating, and is designed for strike less applications when the lockset is being used with a door prep The Schlage J170LAS605RH has a multi-point locking function, dummy levers available for both sides of the door, and is an excellent choice for use on commercial or residental entry doors Schlage J Series locks feature a cylinder bore design that requires no key on latches rated 2-3/8" or below The J170 uses a single cylinder, deadlocking latchbolt with a 1-1/4" bore requiring Schlage L series products for operation