Features:
Condition: 100% Brand New
Location: Left or Right, Front
Oxygen Sensor Ports: 2 Sensor Ports
Interchange Part Number: 30585, 19517, 674256, 1379, 30584, 19516, 674255, 1378
Emissions: 46-State Legal (Cannot ship to CA, CO, NY or ME)  
Restricted States: California, Colorado, New York, Maine

Package Included：
1 x Front Driver Side, Manifold Catalytic Converter
1 x Front Passenger Side, Manifold Catalytic Converter
Gaskets & Bolts as the Picture Shown

Fitment ：
FOR FORD
For Ford  Explorer 3.5L  2013-2019
For Ford  Flex 3.5L  2013-2019
For Ford  Police Interceptor Sedan  3.5L/3.7L  2013-2019
For Ford  Police Interceptor Utility  3.7L  2013-2019
For Ford  Taurus  3.5L  2013-2019
FOR FORD EDGE 3.5L 2015-2018

FOR LINCOLN
For Lincoln  MKS  3.7L  2013-2016
For Lincoln  MKT  3.7L  2013-2018
For Lincoln  MKZ  3.7L  2013-2016

Note:

Converters don’t fail on their own. It is important to complete a full exhaust inspection and correct any other issues such as cracked manifolds and exhaust leaks prior to replacing the converter.This will ensure the root cause for the check engine light has been resolved for emissions code concerns and keep the engine running on all cylinders.

STEP 1:

Remove the cold air intake.Remove the engine cover. Reinstall the oil cap to avoid engine contamination.Remove the engine cover bracket to access the exhaust manifold.Remove the oxygen sensor.Remove the heat shield.

STEP 2:

Inspect the exhaust manifold for cracks before installing a new converter. If it is cracked, the manifold must be replaced or it will cause a non-warrantable converter failure. Remove and save the nuts from the intake flange.

STEP 3:

Remove the engine support bracket.Remove the catalytic converter.Line up the new catalytic converter.Loosely install one top nut to secure the catalytic converter.

STEP 4:

Make sure the engine bracket is attached to the new converter hanger and that the bolt is attached to the new converter hanger. Failure to use the bracket could lead to premature failure.Reinstall the downstream oxygen sensor.

STEP 5:

Complete the catalytic converter installation:

1.Tighten the converter inlet flange nuts and torque to the manufacturer’s specifications.

2.Reinstall hardware for the outlet flange.

3.Tighten the converter bolts and torque to manufacturer’s specifications.

STEP 6:

Reinstall the heat shield and oxygen sensor.Reinstall support bracket.Reinstall the engine cover and the cold air intake.

Please Carefully Check Whether the OE Number And Picture are What You Need Before Buying. If You are Not Sure Whether It Fits, Please feel free to provide the 17 digits VIN to us. If There are Any Problems, Communication by Letter Will be More Effective.