WiFi & RF 5 in 1 DMX512 Master
● 1-5 color WiFi-DMX master, output 1-5 channel DMX signal,comply with the DMX512 standard protocols.8-bit (256 levels) / 16-bit (65536 levels) grey level selectable.
● Tuya APP cloud control, support on/off, RGB color, color temperature and brightness adjust, delay turn on/off light, timer run, static or dynamic scene edit and recall, music play function.
● Voice control, support Amazon Alexa, Google Assistant,Tmall Genie, Xiaodu voice assistant.
● Connect with external two push switch to achive on/off, brightness adjustment,scene switching.
● Match with RF 2.4G remote optional.
● User need set light type by press set key before Tuya APP network connection and match RF remote of the same light type.
● Each WT-DMX-S controller can work as WiFi/RF-DMX512 converter,then use Tuya APP to control one or more DMX512 decoders for synchronized control over long distances.
● Tuya APP cloud control, support on/off, RGB color, color temperature and brightness adjust, delay turn on/off light, timer run, static or dynamic scene edit and recall, music play function.
● Voice control, support Amazon Alexa, Google Assistant,Tmall Genie, Xiaodu voice assistant.
● Connect with external two push switch to achive on/off, brightness adjustment,scene switching.
● Match with RF 2.4G remote optional.
● User need set light type by press set key before Tuya APP network connection and match RF remote of the same light type.
● Each WT-DMX-S controller can work as WiFi/RF-DMX512 converter,then use Tuya APP to control one or more DMX512 decoders for synchronized control over long distances.
NOTED: Battery is not included for the remote due to the shipping safe,pls understanding.
Specification,
Input voltage: 12-36VDC
Input current: ＜ 0.1A
Output signal: DMX512(1-5 Channel)
Input signal: WiFi+ RF 2.4G + Push switch
Control distance: 30m (Barrier-freespace)
Dimming gray scale: 256 or 65536 level
Dimming range: 0-100%
Input current: ＜ 0.1A
Output signal: DMX512(1-5 Channel)
Input signal: WiFi+ RF 2.4G + Push switch
Control distance: 30m (Barrier-freespace)
Dimming gray scale: 256 or 65536 level
Dimming range: 0-100%
Package included,
1x WT-DMX-S
1x RT10 Remote(option).
Note：
1. DMX512 master and DMX512 decoder need to be powered by a separate power supply.
2. Light type setting: Long press the Match/Set key for 2s to sequentially switch five light types: DIM, CCT, RGB, RGBW, RGB+CCT.
RUN indicator color (white: DIM, yellow: CCT, red: RGB, green: RGBW, blue: RGB+CCT).
When the RUN indicator to change to the color that corresponds to the light type,release,then do smart config by tuya APP,or short press Match/Set key to match with RF remote.
3. Factory default: RGBW light type, 8-bit grey output.
Long press Match/Set key for 15s to restore the factory default parameter settings.
Long press Match/Set key for 20s to set to 16-bit grey output.
1. DMX512 master and DMX512 decoder need to be powered by a separate power supply.
2. Light type setting: Long press the Match/Set key for 2s to sequentially switch five light types: DIM, CCT, RGB, RGBW, RGB+CCT.
RUN indicator color (white: DIM, yellow: CCT, red: RGB, green: RGBW, blue: RGB+CCT).
When the RUN indicator to change to the color that corresponds to the light type,release,then do smart config by tuya APP,or short press Match/Set key to match with RF remote.
3. Factory default: RGBW light type, 8-bit grey output.
Long press Match/Set key for 15s to restore the factory default parameter settings.
Long press Match/Set key for 20s to set to 16-bit grey output.
When running a slow dynamic gradient effect, the recommended setting is 16-bit grey output.
When setting to 16-bit grey output, note that the DMX512 decoder should be set to 16-bit decoding mode.
4. An DMX signal amplifier is needed if more than 32 DMX512 decoders are connected, or use overlong signal line, signal amplification should not be more
than 5 times continuously.
5. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of
each DMX signal line.
When setting to 16-bit grey output, note that the DMX512 decoder should be set to 16-bit decoding mode.
4. An DMX signal amplifier is needed if more than 32 DMX512 decoders are connected, or use overlong signal line, signal amplification should not be more
than 5 times continuously.
5. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of
each DMX signal line.
