Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts (Red)
Feature:
1. Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets.
2. Designed for batteries 6.89" (175mm) wide or slightly narrower.
6. Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks
4. Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture.
5. Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries)
6. Notice - the width of this crossbar is 1.76"(44.7mm) and fits most flat-top batteries. If your battery have vent caps at the top, please measure and confirm that the width between the vent caps is greater than 1.76"(44.7mm),otherwise the crossbar cannot be installed normally.
1. Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets.
2. Designed for batteries 6.89" (175mm) wide or slightly narrower.
6. Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks
4. Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture.
5. Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries)
6. Notice - the width of this crossbar is 1.76"(44.7mm) and fits most flat-top batteries. If your battery have vent caps at the top, please measure and confirm that the width between the vent caps is greater than 1.76"(44.7mm),otherwise the crossbar cannot be installed normally.
