• Descriptions: 
    • The compressor clutch is a large electromagnet that, when energized, draws the clutch plate into the clutch pulley. The three main parts of it assembly are the coil magnet, the pulley, and the clutch plate. The magnetic field holds the clutch plate tightly against the clutch pulley as long as current is supplied to it. This in turn engages the drive pulley to the compressor input shaft, causing the shaft to spin. When the compressor clutch is not engaged, the input shaft of the compressor does not spin and the drive pulley freewheels on a sealed bearing assembly.
    ?
  • What' s the Content: 

    • A/C AC Compressor Clutch Kit for 1988-2011 Ford Ranger Mazda 4.0 5.0L 667867

    Descriptions: 

    • The compressor clutch is a large electromagnet that, when energized, draws the clutch plate into the clutch pulley. The three main parts of it assembly are the coil magnet, the pulley, and the clutch plate. The magnetic field holds the clutch plate tightly against the clutch pulley as long as current is supplied to it. This in turn engages the drive pulley to the compressor input shaft, causing the shaft to spin. When the compressor clutch is not engaged, the input shaft of the compressor does not spin and the drive pulley freewheels on a sealed bearing assembly.

    ?

    What' s the Content: 

    • 1 x Pulley With Bearing
    • 1 x Front Plate
    • 1 x Electromagnetic Coil


    Q&A:

    1.How to install the Air Conditioning Clutch? 

    • Remove the air conditioning accessory belt with the proper size wrench. Disconnect the connector on your compressor's magnetic coil. Use the right size socket to remove the 6 mm bolt in the center of the air conditioning clutch.
    • Pull the clutch off, and observe the spacers on the shaft behind it. Keep them in a safe place to avoid losing them. Remove the snap-ring on the shaft that secures the pulley, and slide this off the shaft.
    • Clean the shaft and other parts thoroughly before installation. Insert the new pulley, and engage the snap-ring with the beveled edge facing outward.
    • Install one spacer on the compressor shaft, then install the clutch, and fasten the 6 mm bolt securely.
    • Place the feeler gauge between the clutch and the pulley to ensure proper clearance. If the clearance is not correct, remove the clutch plate and add another spacer.
    • Check the air gap to ensure the clutch will engage properly. If the air gap and/or clearance are not accurate, your clutch might wear out more quickly. Adjoin the connector to the electromagnetic coil.

    ?

    2.What Are the Signs of a Bad AC Compressor Clutch?

    • The pulley that's attached to your AC compressor may freeze and make a squealing sound when you turn your AC system on.
    • Your AC compressor clutch may struggle to engage your AC system's compressor when your AC system is turned on.

    Item Specifics
    Brand auspartshouse
    Manufacturer Part Number 9931787
    Manufacturer Warranty 1 Year
    Interchange Part Number 667867, 4321287, 273268,1540195, 154777, 2211128
    Other Part Number CO 101320C,CA-400,CL-1200,CL 1617C,040075,CL217
    Custom Bundle No
    Included 1 x A/C AC Compressor Kit with Clutch
    Modified Item No
    Product Name A/C AC Compressor Kit with Clutch
    Superseded Part Number E9SZ2987A,E9SZ2E884B,F2OY19D784A,YB413A
    Surface Finish Painted
    Type of Fitment Direct Replacement

    Payment
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us

    Any question or problem, please feel free to contact us via ebay message.

    Just Get It NOW
    content_src_url
    Shop Category
     Store Home
     Wheel Spacers
     Leveling Lift Kits
     3RD Brake Lights
     LED Instrument Lights
     Tire Pressure Sensors
     Fasteners
     Remote Keys
     Sun Visors
     Roof Racks
     Ballast Modules
     Rubber Seal Strips
     Throttle Body
     Thermostat Housing
     Fuel Injectors
     Coilovers
     Ignition Coils
     Wheel Hub Bearing
     Suspension Kits
     Window Regulators
     Sensors
     Mud Flaps
     Lift Supports
     Resistors
     HVAC Blower Motors
     Radiators
     Cooling Fans
     Coolant Overflow Tanks
     Engine Gaskets
     Blend Door Actuators
     Air Suspensions
     AC Condensers
     Heater Cores
     Window Switches
     Door Handles
     Shock Struts
     Windshield Wiper Motors
     A/C Compressors
     Timing Chain Kits
     Timing Belt Kits
     Turbochargers
     Radiator Supports
     Mirrors
     A/C Evaporators
     Engine Motor Mounts
     Starters
     Alternators
     Brake Calipers
     Power Steering Pumps
     Tensioners
     Brake Rotors
     Brake Pads
     Fuel Pumps
     Water Pumps
     Driveshafts
     Idle Air Control Valves
     Power Steering Rack & Pinion
     VVT Variable Valves
     Lug Nuts
     Steering Shafts
     CV Axles
     Hydraulic Lifters
     Towing Parts
     Steering U-Joint Parts
     Door Lock Actuator
     AC Compressor-d
     Spoilers & Wings
     Truck Bed Accessories
     Lawn Mower Parts
     Oil Pump
     Bumper
     Armrest Cover
     Horn
     Truck Bed Mat
     Side Steps Running Boards
     Cylinder Piston Gasket
     Bug Hood Shield
     Running Board Motor
     Bed Step
     Mass Air Flow Sensor
     Dipstick
     Headlights Assembly
     Harmonic Balancer
     Other
    Hot Item
    New List Item
    A/C AC Compressor Clutch Kit for 1988-2011 Ford Ranger Mazda 4.0 5.0L 667867

    Descriptions: 

    • The compressor clutch is a large electromagnet that, when energized, draws the clutch plate into the clutch pulley. The three main parts of it assembly are the coil magnet, the pulley, and the clutch plate. The magnetic field holds the clutch plate tightly against the clutch pulley as long as current is supplied to it. This in turn engages the drive pulley to the compressor input shaft, causing the shaft to spin. When the compressor clutch is not engaged, the input shaft of the compressor does not spin and the drive pulley freewheels on a sealed bearing assembly.

    ?

    What' s the Content: 

    • 1 x Pulley With Bearing
    • 1 x Front Plate
    • 1 x Electromagnetic Coil


    Q&A:

    1.How to install the Air Conditioning Clutch? 

    • Remove the air conditioning accessory belt with the proper size wrench. Disconnect the connector on your compressor's magnetic coil. Use the right size socket to remove the 6 mm bolt in the center of the air conditioning clutch.
    • Pull the clutch off, and observe the spacers on the shaft behind it. Keep them in a safe place to avoid losing them. Remove the snap-ring on the shaft that secures the pulley, and slide this off the shaft.
    • Clean the shaft and other parts thoroughly before installation. Insert the new pulley, and engage the snap-ring with the beveled edge facing outward.
    • Install one spacer on the compressor shaft, then install the clutch, and fasten the 6 mm bolt securely.
    • Place the feeler gauge between the clutch and the pulley to ensure proper clearance. If the clearance is not correct, remove the clutch plate and add another spacer.
    • Check the air gap to ensure the clutch will engage properly. If the air gap and/or clearance are not accurate, your clutch might wear out more quickly. Adjoin the connector to the electromagnetic coil.

    ?

    2.What Are the Signs of a Bad AC Compressor Clutch?

    • The pulley that's attached to your AC compressor may freeze and make a squealing sound when you turn your AC system on.
    • Your AC compressor clutch may struggle to engage your AC system's compressor when your AC system is turned on.
    Item Specifics
    Brand :auspartshouse
    Manufacturer Part Number :9931787
    Manufacturer Warranty :1 Year
    Interchange Part Number :667867, 4321287, 273268,1540195, 154777, 2211128
    Other Part Number :CO 101320C,CA-400,CL-1200,CL 1617C,040075,CL217
    Custom Bundle :No
    Included :1 x A/C AC Compressor Kit with Clutch
    Modified Item :No
    Product Name :A/C AC Compressor Kit with Clutch
    Superseded Part Number :E9SZ2987A,E9SZ2E884B,F2OY19D784A,YB413A
    Surface Finish :Painted
    Type of Fitment :Direct Replacement


    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.