⚡ XY-MOS Dual MOSFET Trigger Switch Driver Module (DC 5–36V, 15A Continuous / 30A w/ Cooling, 400W, PWM 0–20kHz)
Compact DC electronic switch that lets a low-power control signal (MCU/PLC/IO/PWM) reliably switch higher-current DC loads such as LED strips, DC motors, pumps, solenoids, and lamps.
🔧 Key Features
-
⚙️ Logic-Level Control (3.3–20V) — Works with common microcontroller IO (3.3V/5V logic), PLC interfaces, or a DC control signal.
⚙️ Logic-Level Control (3.3–20V) — Works with common microcontroller IO (3.3V/5V logic), PLC interfaces, or a DC control signal.
🧠 Dual MOSFET Parallel Output — Two MOSFETs in parallel for lower effective resistance and stronger current handling.
🎛 PWM Ready (0–20kHz) — Accepts PWM input for brightness/speed control (depends on your load type).
⚡ Wide DC Load Range — Switches DC loads from 5V to 36V.
🧪 Practical Maker Module — Common uses include DC motor speed control and LED dimming when driven by PWM.
📐 Specifications
-
⚡ Operating / Load Voltage: DC 5V – 36V
⚡ Operating / Load Voltage: DC 5V – 36V
🔌 Trigger / Control Input: Digital high/low control, DC 3.3V – 20V
🎛 PWM Frequency Support: 0 – 20kHz
🔥 Output Capacity: 15A continuous @ room temperature, up to 400W (depends on voltage/current and cooling)
🚀 With Enhanced Cooling: up to 30A (requires heatsinking/airflow and proper wiring)
🌡 Operating Temperature: -40°C to 85°C
📏 Dimensions (approx.): 34 × 17 × 12 mm
📌 Power note (important): “400W” is a rating headline (e.g., higher voltage × current). Real continuous power depends heavily on wire gauge, terminal contact, and heat dissipation.🔌 Wiring Quick Start (simple + anti-return)
-
✅ Connect your DC supply to the POWER INPUT terminals on the board (usually labeled DC+ / DC-).
-
✅ Connect your device/load to the OUTPUT terminals (often labeled OUT+ / OUT-).
-
✅ Connect your control signal to the signal input (often labeled PWM/SIG/IN) and share GND with your controller when required.
✅ Connect your DC supply to the POWER INPUT terminals on the board (usually labeled DC+ / DC-).
✅ Connect your device/load to the OUTPUT terminals (often labeled OUT+ / OUT-).
✅ Connect your control signal to the signal input (often labeled PWM/SIG/IN) and share GND with your controller when required.
(Terminal names can vary by batch; follow the PCB silkscreen on your exact board.)
🧠 Tips for Best Results
-
✅ Inductive loads (motors/solenoids/pumps): add a flyback diode across the load to protect the MOSFETs.
-
✅ For 10A–15A continuous, use short/thick wires, tighten terminals firmly, and avoid thin jumper leads.
-
✅ To approach 30A, plan on heatsinking/airflow and conservative duty cycle.
✅ Inductive loads (motors/solenoids/pumps): add a flyback diode across the load to protect the MOSFETs.
✅ For 10A–15A continuous, use short/thick wires, tighten terminals firmly, and avoid thin jumper leads.
✅ To approach 30A, plan on heatsinking/airflow and conservative duty cycle.
✅ Keep PWM ≤ 20kHz for best compatibility.
📦 Package Includes
-
1 × Dual MOSFET Trigger Switch Driver Module (DC 5–36V, 15A / 30A w/ cooling, PWM 0–20kHz)
1 × Dual MOSFET Trigger Switch Driver Module (DC 5–36V, 15A / 30A w/ cooling, PWM 0–20kHz)
💥 Volume Discount Offer — Buy More & Save (si lo tienes activo)
-
10% OFF when you buy 2
-
15% OFF when you buy 3
-
20% OFF when you buy 4+
Discount auto-applied at checkout.
10% OFF when you buy 2
15% OFF when you buy 3
20% OFF when you buy 4+
Discount auto-applied at checkout.
🇺🇸 Premium Support & Shipping
-
🇺🇸 US Stock / Fast Shipping — 2–4 day delivery from Oklahoma, USA. Your purchase supports a US-based small business.
-
🧪 Quality Checked & Tested — Spot-checked before shipping.
-
💬 Local Support — English help within hours, not days.
-
🔁 Easy Returns — 30-day returns; we pay return shipping.
-
📦 Professional Packaging — Safe delivery, 100% guaranteed.
🇺🇸 US Stock / Fast Shipping — 2–4 day delivery from Oklahoma, USA. Your purchase supports a US-based small business.
🧪 Quality Checked & Tested — Spot-checked before shipping.
💬 Local Support — English help within hours, not days.
🔁 Easy Returns — 30-day returns; we pay return shipping.
📦 Professional Packaging — Safe delivery, 100% guaranteed.
📝 Footnotes
⚠️ DC only: This is for DC loads (5–36V DC). It is not an AC mains switch.
🔥 High current = heat: 15A continuous is at room temp; approaching higher current requires enhanced cooling and proper wiring.
📸 Batch variation: PCB markings/terminal labels may vary slightly by supplier run; function/spec class remains equivalent.
