*** PLEASE INFORM US OF THE DESIRED COLOR AFTER PURCHASE; IF YOU DO NOT INFORM US, IT WILL BE SENT IN BLACK. ***

*** ATTENTION *** - The exhaust pipe is intended for use with the original system. We are not responsible for adaptations, installations without a catalytic converter or 4-in-1 manifold, or installations not performed by a trusted professional. The part was manufactured according to the motorcycle's original specifications. - Made of stainless steel. Included items: 1 exhaust pipe + original standard link; 1 clamp; 1 DB Killer.

The HP EVO was developed to be the evolution of the megaphonic slip-on, maintaining its sound characteristics with an innovative and modern design.

The HP EVO features a 3 inch expanded tip made of diagonal cut stainless steel with a bulged edge, providing a detailed and impeccable finish (i.e. it is not just a sawed pipe).

Made of 304 Stainless Steel, it's a lightweight and rust-free product. Welded using TIG process with a visible weld mark. No adaptations are needed or accepted, the slip-on is made for exclusive use with the advertised model. Produced for use with the motorcycle's original exhaust system, replacing only the muffler. Installation is simple, but it's recommended to be performed by a professional.

Technical Data:

Brand: HP Racing

Model: EVO

Sound: Not silent, sporty medium/high rumble;

Type of muffler: Sporty. Not obstructive with thermal acoustic blanket;

ATTENTION:

Link for use with the motorcycle's ORIGINAL catalytic converter / collector. This link does NOT eliminate the use of the catalytic converter.

* DUE TO CALIFORNIA EMISSIONS COMPLIANCE, THESE SYSTEMS ARE SOLD AS CLOSED COURSE COMPETITION ONLY. CALIFORNIA RESIDENTS MUST SEND A STATEMENT PRIOR TO SHIPPING FROM COFFMAN'S EXHAUST THAT "THE SYSTEM ORDERED IS TO BE USED FOR CLOSED COURSE COMPETITION ONLY." SIGNED AND DATED. DUE TO CALIFORNIA EMISSIONS COMPLIANCE, THESE SYSTEMS ARE SOLD AS CLOSED COURSE COMPETITION ONLY. *

F.A.Q

Does the body of the slip-on rust?

A.: No, it is made 100% of stainless steel.

How much noise does the DB Killer reduce?

A.: From 20 to 30%.

Does the DBKiller rust?

A.: No, the DBKiller does not rust! It is made of stainless steel.

Which side do I install the DBKiller?

A.: With the exhaust gas outlet facing inward towards the slip-on.

Installation and Best Practices: The use of tools is necessary (mandatory) for the installation and fixing of the product and its components, to ensure they do not loosen during use! We also recommend, if necessary, the use of a screw lock glue to reinforce the DBKiller screw fixation.

Wash the slip-on only when at room temperature and with neutral soap to avoid stains. Never polish the "HP Racing" logo as this may cause whitening.

In the case of the black slip-on, wash it only by hand! With water, neutral soap and a cotton cloth.

Image for illustration only, the product and its accessories may vary according to the motorcycle model and version of the exhaust tip.