eBay

Minifocus 70mm Universal Arca Swiss Quick Release Plate - Dark Green Color
The quick release plate is precisely machined for higher durability. The exquisite appearance and excellent workmanship are much better than similar products made by mold.
This quick release plate features two shoulder strap joint loops for camera straps, easy to carry equipment with you.
A vertical edge limit on one side allowing the photographer to position the plate flush against the back/front of the camera body for increased stability.
The measurement scales on other side helps position your camera in small increments, and also allow you to keep balancing position for your camera.
Two drop-proof screws protect your gear from accidental drops.
A QD sling swivel mount, two points of QD sling can be installed.
Built-in two slots, with standard 1/4" stainless steel screw for locking into the bottom of the camera.
It also features a 3/8"-16 threaded hole and two Arri locating hole for direct mounting to a monopod.
It is used as a replacement plate or as an additional plate to enable easy and fast swapping between camera’s different quick release mounts.

Compatible with all Arca-Swiss type quick release clamps.
Camera specific, which means they will fit your camera and will prevent your camera from rotating or moving on the plate.
Designed to allow access to all camera controls and functions without removing the plate.
Precision CNC machined from solid aluminum. We do not use inferior castings like some manufacturers.
We eliminated all unnecessary threaded bosses etc. to further reduce weight.
Compatible with 1/4″-20 camera screw. Compatible with Standard for Tripod Ball Head for Camera Tripod Ball head.
The quick release plate replacement size: 70mm(L) x 41mm(W) x 9.5mm(H) / 2.76"(L) x 1.61"(W) x 0.38"(H).
The quick release plate's plane of mach size: 59mm x 36 mm/2.3inch x 1.4inch
Weight: Around 52g/0.11LB.
With 1.5" dovetail standard interface, compatible with all Acra-Swiss Style quick release platforms such as BENRO / ARCA-SWISS / KIRK / Wimberley / Manfrotto / SIRUI / Vanguard / ...
(Note: The item can not fit level-release system of RRS )

Note:
On some cameras, this plate fits better with the flange against the back of the camera.
On other cameras, this plate fits better with the flange against the front of the camera.
Package Including:
1 x Minifocus S4401 Universal Quick Release Plate, 1 x Hexagonal Wrench

[Reliable Quality] 6061-T6 aluminum alloy material for this camera tripod mounting plate, advanced CNC precision provide precise dimension to fit perfectly, long time anodized treatment for higher durability, screws and T-nuts are stainless steel. The exquisite appearance and excellent workmanship are much better than similar products made by mold.

[Functional Snag-Resistant Design] The plate has two drop-proof screw at the bottom and a vertical edge limit on one side to help prevent the camera and plate from sliding all the way forward or backward out of the ball head, in case the head's clamp is inadvertently left loose. Never be left out in the field with a loose tripod plate again!

[Switch Quickly] The universal QR plate assists the camera in quickly switching between the tripod, shoulder, gimbal, and other shooting modes. The measurement scales helps position your camera in small increments, and also allow you to keep balancing position for your camera. Save time when mounting or detaching your DSLR or mirrorless camera.

[Improved Design] The two ends of the quick release plate have two loops for the camera straps to easy carry. Built-in two slots, with standard 1/4" stainless steel screw for locking into the bottom of the camera. The QD sling swivel mount next to Arri locating hole and 3/8" screw hole, two points of QD sling can be installed.

[Compatibility] Out of the box camera quick release plate incorporates a 1.5" dovetail fully compatible with the Arca-Swiss standard dovetail quick-release clamps and heads fits the Arca-type quick release element of ball head models. The maximum size is about 70x41x9.5mm; plane of mach size is 2.3x1.4inch/59x36mm, weight about 52g/0.11lb. Package Includes: 1 x S4401 Camera Quick Release Plate, 1 x Hexagonal Wrench.

[Note] On some cameras, this plate fits better with the flange against the back of the camera. On other cameras, this plate fits better with the flange against the front of the camera.