0-400Hz (arbitrary setting) Professional Vertical Vibration Testing tester Test load 30kg MP3000-E2 Electromagnetic test bench
Test load: 30kg
Vibration frequency: 0-400Hz (arbitrary setting)
Power supply voltage: AC220V （110V is Customizable）
Amplitude of no-load vibration: 0-3mm (P-P peak); (note:
vibration amplitude-varying with frequency and weight, no load
amplitude can not be greater than ±2 mm, maximum acceleration: to be
calculated)
Vibration direction: vertical / (Y)
Power: 1.2kw
Working table size L.W.H.:380 × 350 × 12 (mm)
Environment for use: 0-40 c
Due to the design structure and manufacturing relationship of the vibration equipment, the electric (electromagnetic) vibration mode is selected. The principle is briefly described as: Ampere loop fixed
Law and electromagnetic induction, composed of fixed bracket, exciter, excitation drive amplifier and so on. The working surface changes with the voltage signal of the driver. Because the excitation table is subjected to strong magnetism and resonates with the frequency of the driving voltage, the response of the strong magnetism to the magnetic field of the external substance is combined with the magnetic dipole moment inside the tested substance to form the magnetization. Magnetization has different effects on the tested products, so pure aluminum alloy without magnetic permeability must be used as the work surface during the design process; it is not suitable to use steel and iron plates as the work surface, and at the same time, it must be done well (magnetic flux leakage) ) detection items and improvement of the magnetic flux leakage problem; (using Gauss meter for detection), improving equipment performance is closely linked; when purchasing vibration equipment, be sure to pay attention to the material of the work surface.
application:
In the early stage, it was found that the soldering of circuit board components was weak
Vibration resistance test of the whole product
Product packaging simulation vehicle transportation vibration test
Powder vibration leveling, liquid exhausting, etc.
Test load: 30kg
Vibration frequency: 0-400Hz (arbitrary setting)
Power supply voltage: AC220V （110V is Customizable）
Amplitude of no-load vibration: 0-3mm (P-P peak); (note:
vibration amplitude-varying with frequency and weight, no load
amplitude can not be greater than ±2 mm, maximum acceleration: to be
calculated)
Vibration direction: vertical / (Y)
Power: 1.2kw
Working table size L.W.H.:380 × 350 × 12 (mm)
Environment for use: 0-40 c
Due to the design structure and manufacturing relationship of the vibration equipment, the electric (electromagnetic) vibration mode is selected. The principle is briefly described as: Ampere loop fixed
Law and electromagnetic induction, composed of fixed bracket, exciter, excitation drive amplifier and so on. The working surface changes with the voltage signal of the driver. Because the excitation table is subjected to strong magnetism and resonates with the frequency of the driving voltage, the response of the strong magnetism to the magnetic field of the external substance is combined with the magnetic dipole moment inside the tested substance to form the magnetization. Magnetization has different effects on the tested products, so pure aluminum alloy without magnetic permeability must be used as the work surface during the design process; it is not suitable to use steel and iron plates as the work surface, and at the same time, it must be done well (magnetic flux leakage) ) detection items and improvement of the magnetic flux leakage problem; (using Gauss meter for detection), improving equipment performance is closely linked; when purchasing vibration equipment, be sure to pay attention to the material of the work surface.
application:
In the early stage, it was found that the soldering of circuit board components was weak
Vibration resistance test of the whole product
Product packaging simulation vehicle transportation vibration test
Powder vibration leveling, liquid exhausting, etc.