You are buying lot of HEAT SHRINK SOLDER SEAL BUTT WIRE CONNECTOR SPLICE TERMINAL WATERPROOF
WHITE 26-24 AWG
RED 22-18 AWG
GREEN 18-16AWG
BLUE 16-14AWG
YELLOW 12-10AWG
Features:
An easy one step connection of wires.
Soldered, insulated and sealed can be ideal.
Use in marine and automobile applications.
Melt adhesive in inside solder and seal and with advanced waterproof function.
Polyolefin heat shrink butt connectors improved pullout strength.
Provide seal, strain relief, cable check and insulation.
Technical Specifications:
Shrinkage ratio 3:1
Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside
Color coded connector tubing
Heat activated waterproof adhesive
Low temperature solder sleeve
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
Sizes:
Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0 - 6.0 mm² 12-10AWG
Blue Connectors: Diameter 4.5mm, Cable cross-section 1.5 - 2.5 mm² 16-14AWG
Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5 -1.0 mm² 0.5-1.0AWG
White Connectors: Diameter 1.7 mm, Cable cross-section 0.25 - 0.34 mm² 26-24AWG
Green Connectors:Cable cross-section1.0-1.5mm² 18-16AWG
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
