Ø 3mm to 30mm
M2-AL HSS High Speed Steel Three Flute Spiral Router Bit End Mill CNC Milling Cutter for Aluminum 
 
High-quality materials, excellent craftsmanship, safe, reliable and durable, long service life, wear resistance, high hardness, sharp and high cutting efficiency. Many size and complete specifications, convenient and flexible installation, convenient maintenance and better cost performance.  
 
These high speed steel three-flute cutters were specially developed for machining aluminum.
 
Full grinding, spiral groove, large amount of chip remove, avoid sticking blade, significantly improve production efficiency.
 
The universal chamfered round shank is easy to use, has good compatibility, enhances the anti-vibration and cutting speed of the milling cutter, and makes the clamping firmer without slipping.
 
● Material: High Speed Steel (M2AL)
● Spiral Angle: 40 degrees
● Machining Hardness: within HRC30
● Cutting range: Semi-finishing, Finishing
● Tolerance Accuracy: -0.02 to -0.01
● Applicable materials: Aluminum, Aluminum Alloy, Die Cast Aluminum, Copper Alloy, Soft Copper, etc. ( Cannot be used for stainless steel, die steel, hardened steel.)
● Applicable machines: CNC machining center,  engraving machine and other high-speed machines
● Cooling Method: Air cooling, Oil cooling
● Size = Cutting Diameter * Shank Diameter * Flute Length * Overall Length   :
Size
（mm）		 Cutting Diameter
（mm）		 Shank Diameter
（mm）		 Flute Length
（mm）		 Overall Length
（mm）
3 x 6 x 12 x 60 3 6 12 60
3 x 6 x 20 x 68 3 6 20 68
4 x 6 x 15 x 60 4 6 15 60
4 x 6 x 24 x 68 4 6 24 68
5 x 6 x 17 x 60 5 6 17 60
5 x 6 x 24 x 68 5 6 24 68
6 x 6 x 20 x 60 6 6 20 60
6 x 6 x 30 x 75 6 6 30 75
8 x 8 x 25 x 66 8 8 25 66
8 x 8 x 38 x 82 8 8 38 82
8 x 8 x 60 x 110 8 8 60 110
10 x 10 x 30 x 75 10 10 30 75
10 x 10 x 45 x 95 10 10 45 95
10 x 10 x 60 x 110 10 10 60 110
12 x 12 x 35 x 85 12 12 35 85
12 x 12 x 53 x 110 12 12 53 110
12 x 12 x 100 x 160 12 12 100 160
14 x 12 x 35 x 85 14 12 35 85
14 x 12 x 53 x 110 14 12 53 110
14 x 12 x 100 x 160 14 12 100 160
16 x 16 x 40 x 95 16 16 40 95
16 x 16 x 63 x 123 16 16 63 123
16 x 16 x 100 x 160 16 16 100 160
18 x 16 x 40 x 95 18 16 40 95
18 x 16 x 63 x 123 18 16 63 123
18 x 16 x 100 x 160 18 16 100 160
20 x 20 x 45 x 110 20 20 45 110
20 x 20 x 75 x 141 20 20 75 141
20 x 20 x 100 x 160 20 20 100 160
22 x 20 x 75 x 141 22 20 75 141
25 x 25 x 90 x 166 25 25 90 166
30 x 25 x 90 x 166 30 25 90 166
 
● Exact dimensions can also be viewed in the photo gallery. 
 
● Use Tips:
1. Appropriately reduce the cutting speed and feed rate, which can prolong the service life of the milling cutter.
2. When working, it is necessary to add cutting fluid to protect the knife edge, so that the cutting is smoother.
3. When the oxide film or other hardened layer remains on the surface of the workpiece, it can be cleared by up-milling.
4. Before using the tool, please measure the tool deflection accuracy. When the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
5. The shorter the length of the tool protruding from the chuck, the better. If the tool protrudes longer, the rotation speed, feed speed or cutting amount should be reduced.
6. During cutting, if abnormal vibration or noise occurs, please reduce the speed and cutting volume until the situation improves.
 
● You can find more products in different material, type, color, sizes, quantity and shapes in our shop！ If you have special needs, please contact us, we can customize according to your needs!
 
 ● Note:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.
 
Package included : ( According to your choice )

DataCaciques