Please note regarding measured length of cut hose: 

 

 The hose is supplied in coils and retains a curved shape. One side of the hose will measure shorter than the other unless fully straightened which can be difficult with short lengths.

 

Rubber will shrink as it rises in temperature. If the length of hose is not at room temperature it can measure shorter than actual length.

 

Hardwall hose, with wire is very hard to cut square because of the wire. Therefore one side of the hose may measure different than the other.

 

Because of the above  any hose length received 1/2" less than the amount ordered will be considered a full and complete length . It will not be considered by eBay as, not as described , defective, or unusable in any way.

 

By purchasing hose from my store you agree to these terms regarding hose length. 

If you are purchasing a length of hose and cutting it into shorter lengths, or can use a shorter length than the full foot increments,  and know your exact length requirements, please include your desired lengths  in a note, If I can fill your order from lengths I have on hand , I will include 2 SS hose clamps for free for your troubles.  My 50' coils come from the factory a few inches short from being coiled so I accumulate some odd lengths.

MPI series 100   HARDWALL 5/8 " ID MARINE  EXHAUST  WATER/SUCTION HOSE  J 2006- 1 FOOT

FREE SHIPPING ON HOSE CLAMPS IF PURCHASED WITH A MINIMUM 5' HOSE PURCHASE. # 10 Hose Clamp for this hose  SEE MY ITEM #  290980273446


CLAMPS WILL SHIP FOR FREE IF INCLUDED WITH A MINIMUM HOSE PURCHASE.  PURCHASE HOSE AND CLAMPS, DO NOT PAY, COMMIT TO BUY THEN REQUEST AN INVOICE OR TO COMBINE SHIPPING. I CAN THEN SEND YOU A REVISED INVOICE.  CREDITS FOR SHIPPING WITHOUT BUYER REQUESTING AN INVOICE WILL BE REDUCED BY THE ADDITIONAL EBAY AND PAYPAL FEES INCURRED.

 This hose is hardwall, which means wire reinforced. Used for suction and tighter bends. 

This is new Hose.

THIS AUCTION IS FOR 1 FOOT. Enter multiple quantities for the desired number of feet desired. I stock many types of marine hose, Including fuel, water, exhaust in both hard wall and soft wall. If you do not see what you are looking for please contact me. @ 610-449-1218. If I do not already have a listing for it, I can create one for you.

Original shipping for returned items is not refunded.

There is a 20% restocking charge because this hose is cut to order.

 Calculated shipping is for the continental US only ( the 48 states)

For Alaska, Hawaii. And US territories Shipping may be higher. Contact me for a shipping quote.



HARDWALL WATER HOSE - Series 100

Premium quality marine water hose suitable for a variety of applications including engine water intake, and circulation, bilge discharge, livewell systems and other non-fuel uses. A fully embedded helical wire provides strength and flexibility. Resists heat, ozone, mild acids, bilge oils and engine water. Color coded with green strip brand.

Part #

I.D.

O.D.

Spiral PLY

Burst Pressure

Weight Per CFT

100-0120

1/2"

7/8"

2

600#

27

100-0580

5/8"

1"

2

500#

31

100-0340

3/4"

1-1/8"

2

400#

35

100-0780

7/8"

1-1/4"

2

400#

40

100-1000

1"

1-5/16"

2

300#

44

100-1180

1-1/8"

1-1/2"

2

300#

54

100-1140

1-1/4"

1-5/8"

2

280#

61

100-1560

1-5/16"

1-21/32"

2

240#

66

100-1380

1-3/8"

1-11/16"

2

280#

63

100-1120

1-1/2"

1-7/8"

2

240#

76




Shipping quoted is for the contiguous 48 United States only. Contact me for a shipping quote for Alaska, Hawaii, Puerto Rico, other territories or elsewhere


Original shipping for returned items will not be refunded. If the item was listed as free shipping, the original shipping cost paid by the seller will be deducted from the refund. Item must be unused and in unopened in original packaging if item included original packaging. A 20% restocking fee may apply.