Universal 1-lamp CCFL Inverter Board for LCD panels

Single Lamp CCFL Inverter with 3-wire harness for LCD repair and replacement. Ideal for use with 19” or smaller displays or lamps that measure around 400mm or less in length. Inverter board dimensions: 120mm x 23.5mmWire harness length: 330mmInput Working Voltage: 10-25 VDCOutput Voltage: 650~900VrmsOutput Current: 2.5~7mA Inverter 6 Pin Connector Assignment:1 – VIN: power supply (10-25VDC) – RED WIRE, Positive2 – VIN: power supply (10-25VDC)3 – ENA (enable, switch on/off) switch signal – YELLOW WIRE4 – ADJ (dimming function / brightness control) - YELLOW WIRE5 – GND (Ground wire)6 – GND (Ground wire) – BLACK WIRE, Negative IMPORTANT: Please be sure to insert the wire harness as shown in the photos. The Red (positive) should be on the left when inserted. The harness can be inserted with Black wire on the left which could cause damage. NOTE: Pin 3 ENA needs to have a positive voltage applied and it is possible to connect it to pins 1 & 2 directly. To operate the lamp at maximum brightness pin 4 needs negative 0V and can be connected to pins 5 & 6. Wire Harness:Red Wire= Input (pin #1) Yellow Wire = Switch on/off (pin #3) Yellow Wire = Dimming (pin #4) Black Wire = Ground (pin #6)

Universal 1-lamp CCFL Inverter Board for LCD panels

Single Lamp CCFL Inverter with 3-wire harness for LCD repair and replacement. Ideal for use with 19” or smaller displays or lamps that measure around 400mm or less in length.

Inverter board dimensions:  120mm x 23.5mm
Wire harness length:  330mm
Input Working Voltage: 10-25 VDC
Output Voltage: 650~900Vrms
Output Current: 2.5~7mA

Inverter 6 Pin Connector Assignment:
1 – VIN: power supply (10-25VDC) – RED WIRE, Positive
2 – VIN: power supply (10-25VDC)
3 – ENA (enable, switch on/off) switch signal – YELLOW WIRE
4 – ADJ (dimming function / brightness control) - YELLOW WIRE
5 – GND (Ground wire)
6 – GND (Ground wire) – BLACK WIRE, Negative

IMPORTANT:  Please be sure to insert the wire harness as shown in the photos.  The Red (positive) should be on the left when inserted.  The harness can be inserted with Black wire on the left which could cause damage.

NOTE:  Pin 3 ENA needs to have a positive voltage applied and it is possible to connect it to pins 1 & 2 directly. To operate the lamp at maximum brightness pin 4 needs negative 0V and can be connected to pins 5 & 6.

Wire Harness:
Red Wire= Input (pin #1)

Yellow Wire = Switch on/off (pin #3)

Yellow Wire = Dimming (pin #4)

Black Wire = Ground (pin #6)

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Plazmo Industries

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.