




















Description:
* Speed up new upgrades, seal well and save power, thicker 20mm diameter, faster flow rate and double stop valve oil pump, it only takes 5 seconds to pump
* Double check valve design, faster flow rate, two-way check valve good function, fast oil discharge
* Increase the oil-resistant rubber ball to absorb more water and fine-grain design, anti-slip and anti-aging
* Thickened PVC pipe has a long service life
*A variety of models are applicable, trucks, cars, motorcycles and other models can be used
main properties
PREMIUM MATERIAL:
A rubber hand pump that quickly primes the flow of liquid. The long and thick transparent PVC hose is oil and high temperature resistant. It is equipped with two yellow connectors that increase the tightness of the tube and ball pump to prevent side leakage.
HAND SIPHONE PUMP:
High-flow hoses and large-bore ball pumps pump faster, and the built-in pump allows you to siphon liquid from one container to another.
EASY TO USE:
Good structural design, light weight, easy to carry, easy to use, just connect the hose and ball pump, then use the yellow fitting to tighten.
WIDE USE:
This manual water pump is suitable for fuel, gasoline, crude oil, petrol, oil, water and other common liquids, and it can also serve as a water changer for your home aquarium.
SAFE ATTENTION:
1. Not suitable for salt water or corrosive liquids. 2. The liquid you want to get rid of must be higher than the bucket you are pouring into. 3. Please keep the hose in the container and don't just put it on the surface. 4. Only for vehicles without fuel protection grille.
usage scenarios
This manual water pump is suitable for fuel, gasoline, crude oil, petrol, oil, water and other common liquids, and it can also serve as a water changer for your home aquarium.
*Instructions for use:
The correct way to use the suction pump is to stretch a tube into the liquid you need to pump and force it first
Squeeze the flat rubber bulb to expel the air, then immediately block the outlet of the tube with your thumb, release the rubber bulb, etc.
The ball slowly swells and recovers. After the liquid is pumped up to fill the rubber bulb, the thumb blocking the outlet is released. Repeated operation 1-2 times forms a continuous self-flow.
This oil pump must rely on air pressure to achieve self-flow because the inner diameter of the tube is small and the flow rate is relatively slow.
Directions are used from top to bottom. When using, keep the position of the rubber ball as low as possible.
*Note: The following conditions must be met in order to remove the car's fuel tank:
1. There is no anti-theft oil filter in the fuel tank
2. The pipe should be inserted into the fuel tank when pumping oil
3. The fuel tank height must be higher than the oil drum height
Specifications:
Commonly used as a hand pump in boats to supply fuel to the outboard motor.
Fast and easy handling.
Works on the vacuum principle.
For transferring liquids such as petrol, diesel, oil, water etc.
Material: PVC, rubber, copper
Quantity: 2 * pipes, 1 * pump
Pipe Length: (Optional)
Tube diameter: 16mm inner diameter, 20mm outer diameter
Delivery content:
1 * Oil Pump Kits (Optional as shown)

| Size | 1-4M |
|---|---|
| Material | Durable Rubber |
| Model | Transmission |
| Featured Refinements | Siphon Pump |
| Type | Transfer Fluid Pump |
| Brand | HONUO |
| Warranty | 2 Year |
| Technology | Manual |
| Manufacturer Part Number | Does Not Apply |

