Note:
-Pls compare your original part with our product display pictures, make sure they have the same OE number,same pattern and shape, and also in our copmatiblility list.
- You will receive what picture shows. Anything else not mentioned are not included.
Items Description:
The engine oil cooler can keep the engine oil cool and clean, allowing the car to accelerate faster and helping to extend the life of the oil and engine. Made with lightweight aluminum alloy, use 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency.
Condition: New
Warranty: Yes
Gasket Material: Rubber
Type: Oil cooler filter adapter
Items Included: Cover, Gasket, O-Ring, Screws, Seal
Features: 100% Leak tested, Durability Tested, No Drilling
Aluminum Aluminum Engine Oil Cooler Housing & Oil Filter Housing Adapter Kit with Sensors Gaskets for 11-17 Chrysler 200/300 Dodge Charger Ram Jeep Wrangler 3.6LV6 5184304AE 68105583AF 2008-2013
Fitment :
For Chrysler Models:
For Chrysler 11-17 200
For Chrysler 11-17 300
For Chrysler Town & Country 11-16
For Dodge Models:
For 11-17 Dodge Journey
For 11-16 Dodge Caravan
For 11-15 Dodge Durango
For11-17 Dodge Charger.
For11-17 Dodge Challenger.
For11-14 Dodge Avenger.
For Ram Models:
For 13-17 Ram 1500.
For 12-13 Ram C/V Base.
For 14-16 Ram ProMaster 1500.
For 14-16 Ram ProMaster 2500.
For 14-16 Ram ProMaster 3500.
For Jeep models:
For Jeep Wrangler V6 3.6L 12-17
For Jeep Cherokee V6 3.6L 14-16
For Jeep Grand Cherokee V6 3.6L 11-15
! Only for 3.6l 6 cyl (V6) engine!
Vehicle compatibility charts are for reference only. Check your OEM vehicle below to meet your needs.
5184294AC, 5184294AD, 5184294AE, 5184304AD, 5184304AE, 5184304AF.
68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AF, 68105583AE, 68105583AG,68105583A.
5149062AA,5149077AB,5184562AC,5184331AC,6104084AA,68079747AA,68166067AA.
MS97204, MS19879, MS97205, MS19878.
Dorman:926-876
REPLACE PART NUMBER:
5184294AE, 5184304AE, 5184304AF, 5184294AD, 5184294AC, 68105583AG, 68105583AF, 68105583AE, 68105583AD, 68105583AC, 68105583AB, 68105583AA, 68308741AF, 68308741AC, 68308741AB, 68308741AA, 68310865AF, 68310865AC, 68310865AB, 68310865AA, 68365925AD, 68365925AC, 68365925AB, 68365925AA, 68365931AD, 68365931AB, 68365931AA
Features:
- Tested the product 100% for leaking
- The full assembly oil filter assembly included: Aluminum Housing, Plastic Oil cap, oil filter, temperature switch, oil pressure sensor, oil cooler, 5 pcs bolts, manifold seals
- Inspect all seals and O-ring carefully before installation
- After removing the old oil filter adapter, clear any residues in the engine valley
- There is a little pointed edge towards the section that inserts into the block in engine valley that need to be removed if need
- Make sure that the Aluminum Housing seated fully in the engine valley, and it is necessary to check the clearance
- Insert the cooling pipe fully on the tube and put the clamp correctly
Special:
100% Quality Assurance Tested, More Responsive, Less Expensive, Easier to Install.
Aluminum oil filter housing, improved solution for leak problems.
Direct replacement, not a genuine part, but works and looks exactly like the factory part.
Stable, resistant to oil, abrasion and temperature.
Allow the engine oil to pressurize through the filter.
Removes foreign particles to keep the engine clean.
Cool the oil entering the engine.
16-layer design (8 thick plates and 8 thin plates), the oil cooler can cool better.
Pre-installed oil filter, fluid temperature sensor, oil pressure sensor, bypass valve and spring and NBR sealing rings.
Comes with a full set of gasket seals for worry free installation.
Material and Colour:Aluminum &Sliver
Package includes:
1x Oil Filter Housing Adapter Assembly;
6x Upper Intake Manifold Gasket;
6x Lower Intake Manifold Complete Gasket.(100% brand new, never used or installed).
Installation Note:
When installing the temperature sensor and oil pressure switch, it is recommended not to turn it to the bottom of the screw vigorously. Using too much force may cause damage to the screw hole of the radiator and affect the use.And such improper operation is a man-made damage ring, which will affect the product warranty.
FAQ:
Where is my item?
All items are shipped out within same business days after full payment has been cleared. An automated email will be sent containing the tracking number.
The tracking number does not update
The automated email from Ebay system means your order has been processed but does not mean it has been shipped out. It may take up to 24 hours for the system to update.
I purchased by mistake, how do I cancel the order?
Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.
I received your item but it does not fit or is defective
Please contact us so we can assist you on the matter.
I tried to contact you, but cannot reach anyone.
Our officer hours are 9:30AM - 5:30PM PST Monday - Friday. Emails are the best way to contact us and should receive a response within 24 hours.
Why Us:
We are a manufacture who specialize in ignition systems and have been in auto parts industry for over 5 years, offering HIGH QUALITY ignition system Brand that 100% factory tested with competitive price. And 1 year warranty offered with no hassle or questions asked.
Certificates of our product
Our Factory
