Genuine LMR®-400-Lightweight
Flexible Low Loss Communications Coaxial cable in various lengths - manufactured by Times Microwave Systems and available from McGill Microwave Systems Limited – Authorised Distributor of all Times Microwave Systems products.
Manufactured by Times Microwave Systems(TM) and officially distributed in Europe by McGill Microwave Systems Ltd
Important Alert: There are many "fake" or "alternative" attempted copies of the Times Microwave Systems LMR® High Performance Coaxial Cable and Connector range - buy only 100% genuine Times Microwave Systems Products - available only here on eBay from an official UK Authorised Distributor.
LMR®-LW is a lightweight low loss coaxial cable that employs an aluminium braid shield instead of the traditional tinned copper shield. LMR-LW has been designed and engineered with a combination of electrical, physical and mechanical properties that reduce weight and cost.
LMR®-400-Lightweight is ideal for
- Drop-in replacement with up to 40% Lower Attenuation for RG-8, RG 213, RG 214 and 9913 Air-Dielectric type Cables
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms, Radio Amateur, PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable
- 3G or 4G repeaters
- Radio antennas or receivers
Attenuation
| Attenuation — dB per 100m | |
| Frequency | Attenuation |
| 30 MHz | 2.2 dB |
| 50 MHz | 2.9 dB |
| 150 MHz | 5.0 dB |
| 220 MHz | 6.1 dB |
| 450 MHz | 8.9 dB |
| 900 MHz | 12.8 dB |
| 1500 MHz | 16.8 dB |
| 2500 MHz | 22.2 dB |
| 5800 MHz | 33.5 dB |
| 8000 MHz | 42.7 dB |
Construction
| Construction | ||
| Component | Material | Diameter |
| Inner Conductor | Solid BCCAl | 2.74 mm |
| Dielectric | Foam PE | 7.24 mm |
| Outer Conductor | Aluminium tape | 7.39 mm |
| Overall Braid | Tinned copper | 8.13 mm |
| Jacket | Black PE | 10.29 mm |
Mechanical & Environmental
| Mechanical Specifications | |
| Property | Value |
| Bend Radius, installation | 25.4 mm |
| Bend Radius, repeated | 101.6 mm |
| Bending Moment | 0.50 Nm |
| Weight | 0.075 kg/m |
| Tensile Strength | 72.6 kg |
| Flat Plate Crush | 0.71 kg/mm |
| Temperature range | -40⁰C to +85⁰C |
Compatible connectors
This cable can be installed with the following connectors:
LMR-400 'TC' (solder centre pin) Connectors
TC-400-716FC, TC-400-716MC, TC-400-716MC-RA, TC-400-716M-RA-D, TC-400-716M-X, TC-400-B, TC-400-BM-X, TC-400-HNM, TC-400-HNM-RA, TC-400-MUHF, TC-400-NF-X, TC-400-NFC-BH (A), TC-400-NFC, TC-400-NM, TC-400-NMH-X, TC-400-NM-75/50, TC-400-NMC-2, TC-400-NMC-RA (A), TC-400-NMH-RA-D, TC-400-NMH-RA-SS, TC-400-NM-RP, TC-400-QDSM, TC-400-QNM-X, TC-400-SM-X, TC-400-SF-X, TC-400-TF-X, TC-400-TF-RP, TC-400-TM-X, TC-400-TM-RA-D, TC-400-TM-RP, TC-400-TM-RP-RA-D, TC-400-4310M-X, CR-400-X
LMR-400 'EZ' Install (non-solder) Connectors
EZ-400-4195M-X, EZ-400-4310M-X, EZ-400-4310M-RA-X, EZ-400-716M-X, EZ-400-716M-RA-X, EZ-400-BM-X, EZ-400-BM-RA-X, EZ-400-NF-BH, EZ-400-NF-BH-X, EZ-400-NF-X, EZ-400-NMC-2-D, EZ-400-NMH-RA-X, EZ-400-NMH-X, EZ-400-NMK-D, EZ-400-NMK-X, EZ-400-QNF-X, EZ-400-QNM-X, EZ-400-QNM-RA-X, EZ-400-SF-X, EZ-400-SM-X, EZ-400-SM-RA-X, EZ-400-TF-X, EZ-400-TF-BH-X, EZ-400-TF-RP, EZ-400-TM-X, EZ-400-TM-RA-X, EZ-400-TM-RP, EZ-400-UM, EZ-400-UM-X, EZ-400-UM-RA-X, CR-400-X
LMR® is a registered trademark of Times Microwave Systems