Mosfet voltage regulator rectifier direct replacement
The quality exceeds the OEM equipment
Improved heat sink and charging capabilities
All shipped products are tested
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
There are two possible regulators for the Outlander 1000 2012 and many Outlander Max 500 models. This regulator fits mostly the European / International versions of these models. For the North American versions, the right regulator is part RM30506H. Always check in the 'Fits models' section and please compare to your original part before buying.
All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.


Runs much cooler than the traditional Shunt voltage regulator rectifier.

Less load on the stator, less work, less fuel is used and you save.

The power charging your battery is steadier and smooth.

Extends the battery’s life and cold cranking capacity.

Removes stator load resulting in more engine power.

Optimize power delivery by switching the stator coils on or off.


designCan-Am Outlander 1000 -- 2012
Can-Am Outlander 1000 DPS -- 2013-2016
Can-Am Outlander 1000 XT -- 2012-2015
Can-Am Outlander 1000 XT-P -- 2013-2015
Can-Am Outlander 1000R -- 2016-2018
Can-Am Outlander 500 -- 2015
Can-Am Outlander 500 DPS -- 2013-2015
Can-Am Outlander 500 XT -- 2010-2015
Can-Am Outlander 500 XT-P -- 2010
Can-Am Outlander 650 DPS -- 2013-2018
Can-Am Outlander 650 EFI -- 2017-2018
Can-Am Outlander 650 T3 EFI F/C -- 2018
Can-Am Outlander 650 XMR -- 2013-2018
Can-Am Outlander 650 XT -- 2010-2018
Can-Am Outlander 650 XT-P -- 2010-2011
Can-Am Outlander 800 R DPS -- 2013-2015
Can-Am Outlander 800 R XMR -- 2011-2012, 2015
Can-Am Outlander 800 R XT -- 2010-2015
Can-Am Outlander 800 R XT-P -- 2010-2011, 2013-2015
Can-Am Outlander 800 R XXC -- 2011
Can-Am Outlander 850 -- 2016-2017
Can-Am Outlander Max 1000 -- 2013-2015
Can-Am Outlander Max 1000R -- 2016-2017
Can-Am Outlander Max 500 -- 2015
Can-Am Outlander Max 500 DPS -- 2013-2015
Can-Am Outlander Max 500 LTD -- 2010
Can-Am Outlander Max 500 XT -- 2010-2015
Can-Am Outlander Max 500 XT-P -- 2010
Can-Am Outlander Max 570 -- 2016
Can-Am Outlander Max 650 DPS -- 2013-2017
Can-Am Outlander Max 650 XT -- 2010-2017
Can-Am Outlander Max 650 XT-P -- 2010-2012
Can-Am Outlander Max 800 R -- 2013-2015
Can-Am Outlander Max 800 R DPS -- 2013-2015
Can-Am Outlander Max 800 R LTD -- 2010-2012
Can-Am Outlander Max 800 R XT -- 2010-2015
Can-Am Outlander Max 800 R XT-P -- 2010-2015
Can-Am Outlander Max 850 -- 2016-2017
Can-Am Outlander XMR 1000 -- 2013-2016
Can-Am Renegade 1000R -- 2016-2017
Can-Am Renegade 570 -- 2016-2017
Can-Am Renegade 850 -- 2016-2017
Can-Am Renegade XXC 1000 -- 2012-2016
Can-Am Renegade XXC 800 R -- 2010-2015
710001191
Dimensions:
Width: 120 mm
Length: 111 mm
Height: 35 mm
Distance between fixation holes center to center: 94 mm
Other specifications:
Number of plugs: 2
Number of pins: 5
Minimum Charging Voltage: 14.5 V +/- 0.5 V
Maximum Charging Current: 65 A / 660 W
Open Circuit Voltage: <15 V
Operation Temperature: -20?C to 85?C
Before installing your new voltage regulator rectifier;
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main New Jersey facility, we still guarantee that your order will be delivered within the specified time period.
This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
find parts for :