Features:
  • Mount your Garmin Varia RCT715 rear radar/camera light to a compatible Bontrager Blendr saddle.
  • Attaches under your Bontrager Blendr saddle, holding your Varia RCT715 rear radar light securely.
  • Weighs just 23 grams without hardware.
The Garmin Varia RCT715 and OEM Varia locking interface pictured are for reference only and not supplied.

What's Included
  • 1x 3D printed mount.
  • 2x M5x14mm button head screws.
  • 1x M3x10mm cap screw.
  • 1x M3x14mm cap screw.
Please note: The Garmin Varia RCT715 locking interface is not included. This is part of the OEM seat post mount that comes with your Varia RCT715 and bolts to the MagCAD mount.

Overview
This mount allows you to attach your Garmin Varia RCT715 radar/camera light underneath a compatible Bontrager saddle, making for a very clean and aesthetically pleasing installation. It holds your device securely behind your saddle, positioned vertically, to reliably detect traffic coming from behind.

The locking mechanism that comes with your Varia RCT715 will unbolt from the OEM seat post mount and bolt to this MagCAD mount. Therefore, you get the locking security of the OEM Garmin interface with the versatility of the MagCAD mount.

This MagCAD mount has been designed to work with a Bontrager Aeolus saddle but should also attach to a Commuter Comp or Boulevard saddle which all have the Blendr integration.

The Bontrager Blendr saddle system introduces 2x M5 threaded inserts to the underside of the saddle, at 46mm hole centre to centre, allowing various accessories to be attached. If you're unsure if your saddle is compatible feel free to get in contact.

This mount has a 21.5 degree twist to hold your Varia vertically with your saddle level. If you have your saddle tilted forward and want the angle of the mount increased to compensate custom mounts can be printed in around 2-3 weeks.

​Application
Follow the below procedure to mount your Varia to your Bontrager Blendr saddle:
  • Remove the locking interface from your OEM Garmin Varia RCT715 seat post mount using a Torx T10 driver and retain the screws, they will not be required.
  • Bolt the locking interface onto the MagCAD mount with the M3 cap screws, supplied.
  • Attach the mount to the underside of your Bontrager saddle with 2x M5x14mm button head screws, supplied.
  • We recommend using thread lock on all fasteners to keep the mount secure and parts should be inspected periodically.
Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.

Customisation
As with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Delivery
All items in stock and dispatched promptly, usually the same day.

Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.