You may also like
NOTE: 1.Please check your key blade look the same as the one in our product picture above before you purchase, Some key blade are in the opposite direction. 2. Make sure that the frequency and chip of the original car key are the same. If you are not sure, please ask the locksmith for help. Condition: 100% Brand New Is this compatible with my car/key? Yes, if your car is one of the following below and your current key looks identical:
Features: 1. The item is a new DIY remote key. 2. The key includes key housing, circuit board, chip and battery. It's a full remote key. 3.The key is suitable for your original key with the same frequency, blade and appearance. Note -You will need to have at least one working either black key or another remote key It will not work if you have service grey key if your origional key has different appearance or frequency, please don't buy. It will not work. To check this is correct key for your car you can pop open your existing key case cover and check number stamped be on remote part number should be "50171" or "42050" Important Notice 1.You need to go to your local dealer or Locksmith shop to cut the key and program to your car. 2.Please make sure your key is exaxtly same as ours, if you are not sure please send your original key photo to us for Please Note: Our products are not provided with logos Remote Programming:
STEP1. Open Driver side door
STEP 2. Put the Original key in and out of ignition for 2 times
STEP 3. Close and open driver door for 2 times
STEP 4. Original Key in and out for once
STEP 5. Shut and open door for twice
STEP 6. Close door
STEP 7. Put Original Key in the ignition and Turn ignition on
STEP 8. Turn ignition off and remove key
STEP 9. Door locks will cycle
STEP 10. Do the following for all remotes:
Press lock and unlock together for 1s, then press the lock button
STEP 11. Locks will cycle put key in ignition turn to on then off
STEP 12. Remove key from ignition, close door and test remote
To Delete All Remotes from the Vehicle
At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.
Program keys
STEP 1. Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)
STEP 2. Open and shut door for 6 times
STEP 3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition
STEP 4. Leave for 60s (or til light goes out)
STEP 5. After 60s security light stops flashing then you can start car.
STEP 6. Take key out
STEP 7. Open and shut door
If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again. Package Includes: 1 x 2 Buttons Remote Key 1 x Battery | Shop Category | ||||||||
Payment
| |||||||||
Shipping
| |||||||||
Returns
| |||||||||
Contact Us
| |||||||||