You only get What's In Photo. This is not a complete jet kit. it is only the main and pilot as seen in last photo circled in red.
This kits includes 1 one size over N224.103 type Pilot Jets #25 and 1 three size over N102.221 small round type Main Jets #150
and two shim for the carburetor needle.
Stage
3 is for motorcycles with stock or lightly modified engines with
individual air intakes and baffled aftermarket exhaust system.
Jet kits are easy to install but you will need to have some basic carburetor tuning knowledge.
refer to your shop manual for carburetor removal and installation.
This is only jetting suggestions for your application.
These are recommendations only, based upon testing at sea-level atmospheric pressure,
a 65-80F degree ambient air temperature,
on super unleaded pump fuel with a stock motor.
There
are too many variables outside of our control to give you an exact
configuration that works perfectly under all conditions.
Our recommendations are just that, a starting point to reference from.
Higher elevations, high humidity, hotter temperatures are examples that will require leaner jetting.
Colder temperatures are an example that will require richer jetting.
If you are not knowledgeable or don’t feel comfortable tuning your machine yourself, find a mechanic in your area who is.
We are not responsible for problems derived from improper jetting and/or usage.
Always
check that your jetting is correct when changing parts that could
affect the intake system, exhaust system and any product or change
that could alter fuel combustion in the cylinder.