Create your custom sticker with anything you want. Choose from a circle, square or rectangle. Simply just provide any art or image of your choice & we will create 10 stickers of the size or shape of your choice. It is your responsibility to ensure you have the rights to use anything that is sent for a sticker.

**Before purchasing this listing, send a message with the desired sticker design. I will check to see if it will need to be recreated to ensure a high quality output. Once you approve the draft, you can then purchase the listing and the stickers will be made. Sometimes it may take a couple of days for the draft & approval so this can delay eBay's shipping & handling time if you purchase before sending a message first.**

These have a high quality laminate that will uphold in almost any weather conditions when applied properly.

High quality sticker on 3M vinyl. These stickers a printed on 3M vinyl & have a matte finish laminate for a long lasting & durable life span.

This can be applied to various surfaces such as windows, autos, computers walls, floors, mugs, thermos, bottles, etc. 

This same quality of sticker was tested on a coffee mug. It has been hand washed dozens of times & also put through the dishwasher multiple times with no signs of wear. If placing on an item that is heavily used & may be washed, pay extra attention to application process to ensure the surface is clean & the sticker is fully applied with no air bubbles or anything else that may encourage peeling.

Please Note: Due to the variations of screen color modes, colors may slightly vary from images but depict a close representation of actual color.

 

Apply to only clean & dry surfaces. It is recommended that you use a squeegee during application process to ensure proper adherence (a plastic debit card like item may work as well) & minimize the risk of air bubbles.

 

 

All packaging & waste material, with the exception of the application tape, is recyclable under the "mixed paper" category at most facilities. Verify with your local waste management facility.

 

 

3MTM IJ35C-10 Gloss White Graphic Film w/ Comply Adhesive

IJ35C-10 is a 3.2-mil vinyl film with a permanent, pressure-sensitive adhesive.  Air release channels for bubble-free installation. It is compatible with solvent, eco-solvent, latex and UV inkjet printers, as well as screen printing. Recommended for short to medium-term, indoor and outdoor promotional graphics. Possible uses include signs, trade show and point-of-purchase displays, exhibits and architectural applications.

 

PRODUCT FEATURES:

·         Gloss white vinyl with opaque gray adhesive

·         Thickness - without adhesive: 3.2 mil (0.081 mm)

·         Thickness - with adhesive: 4.0 mil (0.102 mm)

·         Permanent pressure sensitive adhesive with air release

·         Embossed polycoated paper liner

·         5 year expected performance life

 

**All sizes are the longest side of the sticker**

 

Actual measurements may vary from 1/16th-1/8th of an inch.

 

 

How to apply your sticker

 

For best results, apply die cut when temperature is above 50 degrees and below 90 degrees Fahrenheit

 

1. CLEAN: Wipe clean the window or surface you are applying the decal to with a mild cleaner. Allow surface to dry.

2. APPLY: Use a squeegee or plastic card to rub and smooth the decal onto the window from one side to the other.

3. FIXES: IF the sticker is applied poorly, there is a very little window of time to quickly & carefully peel-back the sticker & re-adjust/apply. It is NOT recommended since the sticker may stretch or tear in a rare occasion but the durability of the sticker allows for some give for re-application.