120mm fan to 92mm fan slot adapter. Let's you mount a larger 120mm fan in a fan slot that can only fit a 92mm fan.

Has centered walls that are flush with the 92mm fan slot.

If, however, you want to fit a smaller 92mm fan into a slot that only fits a 120mm, then you want my other listing:https://www.ebay.com/itm/304148161982

Choose the height of the adapter so that the larger 120mm fan can sit far enough away from the 92mm slot to get clearance. Usually there are walls of the case or what not close around the 92mm fan slot that would block the larger fan. Take a look at the pictures mounted in case*.

Comes with the 8 screws you'll need; really easy just screw your 120mm fan to the adapter and then the adapter to the case.

Fits standard 120mm fans and 92mm slots. Will almost certainly fit unless you have a really strange fan; if in doubt refer to the technical drawing and measure your fan & fan slot.

Unlike other adapters, this design completely fills in the frame around the 140mm fan so the case is still sealed to air afterwards and your fan works as efficiently as possible providing airflow.

You can also use this to mount both a 120mm fan AND a 92mm fan in a forced air setup into either a 120mm or 92mm fan slot. You will want at least 30mm height in that case since you'll want a big enough plenum between them.

If you need an adapter for other sizes or want another color just message me.

ONLY ONE ADAPTER AND EIGHT (8) SCREWS INCLUDED.

*DEMO PHOTOS ARE OF THE 140MM TO 120MM FAN SLOT ADAPTER BUT YOU GET THE IDEA.