Feature:
- Height: 15-11/16 In.
- Width: 28-11/16 In.
- Thickness: 11/16 In.
- Weight: 11.5bs
- Tank Material: Plastic
- Core Material: Aluminum
Package Included:
1x New Radiator
Fitment:
2007-2011 Toyota Camry 2.4L
How to clean the Radiator?
1. Open and secure the engine cover firmly to avoid accidental sliding. Then, use a nylon brush and soapy water to gently wipe the dead insects and debris collected on the water tank grille.
2. Be sure to scrub in the direction of the water tank fins, do not scrub in the opposite direction, because the metal is fragile and easy to bend and deform. After cleaning the grille, draw a gentle stream of water from the hose above the grille to ensure that all debris has been completely removed
What to do if the car water tank leaks?
1. Check whether the water tank cover of the car is closed tightly. If it is not fastened, the water tank cover should be fastened, and then check whether the leakage of the car water tank is improved.
2. Fill the water tank with gas, and the water in the water tank will seep out under pressure, so as to know where the car water tank is leaking, and then formulate a repair method.
3. Open the engine oil cover to see if there are traces of emulsification in the oil inside. If there are traces of emulsification, you should immediately disassemble the engine and replace the cylinder gasket.
4. During the driving of the car, if the water tank ruptures due to a traffic accident or severe vibration, you can add a strong plugging agent to the water tank, or you can put some loose tobacco into the water tank to block the leak. Can solve the problem temporarily, and then go to the repair shop to repair according to the actual situation.
Use and Maintenance:
1. The radiator should not be in contact with any acid, alkali or other corrosive properties.
2. It is recommended to use soft water. Hard water should be used after softening treatment to avoid blockage of the radiator and the generation of scale.
3.When using antifreeze, in order to avoid corrosion of the radiator, be sure to use a long-term anti-rust and antifreeze that is produced by a regular manufacturer and meets national standards.
4.In the process of installing the radiator, please do not damage the radiator (sheet) or bump the radiator to ensure the heat dissipation capacity and sealing.
5. When the radiator is completely drained and then filled with water, turn on the drain switch of the engine block first, and then close it when water flows out to avoid blisters.
Notes:
When the water temperature of the engine is high, the water pump circulates repeatedly to reduce the temperature of the engine (the water tank is composed of hollow copper pipes. The high-temperature water enters the water tank and circulates to the cylinder wall of the engine after being air-cooled) To achieve the purpose of protecting the engine, if the water temperature is too low in winter, the water circulation will be stopped at this time to avoid the engine temperature from being too low.
