We
have the solution to your lower rad hose problems. Some of the motors
we have received came with the oem plastic water neck broken. Until now,
you could only order a replacement part from Honda/Acura. Problem is
they only sell the housing complete with the thermostat, which is pretty
expensive and it doesn’t provide any real benefits. If your housing
isn’t broken then you still have to get the right hose, with the right
angles and mate it to the rad. After that, you have to figure out where
to put your fan switch and in the past the only option was to use a
special inline aluminum hose adapter.
This product solves all these problems and gives you some options when doing your swap.
The housing swivels, allowing you to position the water outlet angle before it is tightened down.
The
provided custom made fitting is the same size as the oem rad hose on
one end, and is threaded for an AN fitting on the other end.
This
allows you to use whatever size fitting you need for custom
installations. If you want to use braided hose with AN fittings, this
housing will bolt on easily and with the right adapter threaded in,
you’ll be all set.
The swivel neck comes pre-assembled with a quality Stant thermostat (180 deg °F) which is held in place with a 'C' clip.
Last
but not least, this was a bonus we found while designing it. We noticed
that by adding one more hole to the flange you could completely remove
the oem black plastic housing from the block and delete the heater core
hoses. When set up this way, our thermostat housing is bolted directly
to the oem aluminum water pump housing. This is perfect for race car
applications.
Adjustable, set the rad hose at any angle
Fan switch port for engine swaps
Easily deletes heater core hoses on race cars
Threaded water outlet for custom setups.
Dimensions & Material:
The
housing has three ports in the body, one for your fan switch, a 1/8 NPT
port for gauges etc., and also NPT port for our optional recirculation
fitting
2 NPT plugs are included in case the ports remain unused.
The kit uses a standard size thermostat that you can easily replace with anything in the (160-195 °F) degree range.
Made of High Quality Aluminium.
Color: Silver
Package Included:
1x Cooling Components Swivel Neck Thermostat. (100% Brand New Never Used Or Installed)