|
Wheel Spacers
Wheel spacers fit between your car's wheel and the hub that the wheel mounts to on the car.Spacers push the wheel away from the hub ("spaced out"). These are used to widen the track of the vehicle, leading to more stability and better handling, which is why they are often used on racecars. Wheel spacers can also make a car look better by locating the wheel in a more visually aggressive position. There are two types of spacers: One type simply slide onto the hub, while the other type bolt to the vehicle's wheel studs. Bolt-on spacers have another set of studs that the wheel installs onto.
Item Details
Bolt Pattern: 8x6.5 or 8x165.1mm
Thickness:3" mm
Wheel Bore: 125 mm
Thread Pitch: 9/16" Studs & Lug Nuts
Material: Forged 6061 T6 Aerospace Aluminum
Fitment:
Chevrolet
Chevrolet Avalanche 2500 2002-2006
Chevrolet Express 2500 1997-2010
Chevrolet Express 3500 1996-2010
Chevrolet Silverado 1500 HD 2001-2003&2005-2007
Chevrolet Silverado 2500 1999-2004
Chevrolet Silverado 2500 HD 2001-2010
Chevrolet Silverado 3500 2001-2007
Chevrolet Silverado 3500 HD 2007-2010
Chevrolet Suburban 2500 2000-2010
GMC
GMC C2500 1988-2000
GMC K2500 1979-1986&1988-2000
GMC K2500 Suburban 1979-1986&1992-1999
GMC Sierra 1500 HD 2001-2003&2005-2007
GMC Sierra 2500 1999-2004
GMC Sierra 2500 HD 2001-2010
GMC Sierra 3500 2001-2007
GMC Sierra 3500 HD 2007-2010
GMC Yukon XL 2500 2000-2010
Hummer
Hummer H2 2003-2009
Advantages of the Item
1. Improve Vehicle Stability:
2. Wheel spacers widen your vehicle wheel base, increasing stability, aggressive stance is a free bonus
3. Increase Clearence:
4. Wheel spacers increase tire to frame clearence to allow installation of lift/lowring kits and wider/larger, high traction tires.
5. Hardened CR-Steel Studs:
6. Forged, heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.
How to Install Wheel Spacers？
Step 1
Park your car or truck on a level surface. Loosen the lug nuts that fasten the wheel to the hub. Slide a floor jack under the car at the appropriate point and jack up the car. Lower the car onto a jack stand. Repeat this process until all four corners are supported on a jack stand.
Step 2
Finish removing the lug nuts. Slide the wheels off the hub and set them out of the way. Spray degreaser on the lug studs and wipe them down with a rag. If they are very dirty, use a wire brush to clean up the threads. Wipe down the hub surface where the wheel installs, as well.
Step 3
Slide the wheel spacer onto the studs, if it is not the bolt-on type. Line the holes in the spacer up with the wheel studs and then slide the spacer over the studs until it seats firmly against the hub. Some vehicle (BMWs for instance) use lug bolts that thread into the hub. In this case, line up the spacer with the holes in the hub.
Step 4
Place the wheel spacer onto the studs, if it is a bolt-on wheel spacer. Install the lug nuts onto the studs so that the spacer is bolted to the hub. The bolts will come with the spacer, but are also available at auto parts stores if they are not with the spacer. Tighten the nuts that hold the spacer in place to the specifications outlined in the directions. This will likely be around 90 foot-pounds.
Step 5
Slide the wheel onto the lug studs so that it seats firmly against the spacer. Install the lug nuts (or lug bolts) with the lug wrench and tighten them. Repeat for the other corners of the vehicle.
Step 6
Slide the floor jack under the car and lift the vehicle so that the jack stands can be removed. Lower the vehicle to the ground, one corner at a time.
Tighten the lug nuts with a torque wrench in a crisscross, star pattern. Tighten them to the manufacturer's recommended setting, which should be anywhere from 70 to 90 foot-pounds, depending on the vehicle. Check the tightness of the lug nuts after the vehicle has been driven 100 miles.
Package Includes
2 x Wheel Spacers
Note:
1. Make Sure You Get 5-7 Turns Before Tightening
2. Installation should only be performed by a trained professional.
3. The Back Of The Adapter Must Sit Flush On The Hub
| Item Specifics | |
|---|---|
| Brand | auspartshouse |
| Manufacturer Part Number | 9873514 |
| Manufacturer Warranty | 1 Year |
| Torqued Down By Hand At | 110FT/LB |
| Hubcentric | NO |
| Lug Patterns | 8 Lugs |
| Type | Wheel Spacers |
| Custom Bundle | No |
| Stud Grade | 10.9 |
| Quantity | 2 x wheel spacers |
| Modified Item | No |
| Refund policy | Free 30 day returns |
| Material | High Quality t6 6061 Billet Aluminum |
| Thickness | 3" |
| Vehicle bolt pattern | 8x6.5 |
| Wheel bolt pattern | 8x6.5 |
| Thread pinch | 9/16" |
| Hub Center | 125mm |
| Interchange Part Number | E11540001CP |
| Color | Silver |
1. More than 90% orders processed within 24 hours of payment verification.
2. We only ship to the address in order provided to us. Your order address will be the shipping address.
3. The images shown is the the actual item you will get and the size are for your reference.
4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Any question or problem, please feel free to contact us via ebay message.
Shop Category Hot Item
New List Item
|
2X 8x6.5" Wheel Spacers 3" For Chevy Express 250 GMC Sierra 3500 C2500 110FT/LB
Wheel Spacers Wheel spacers fit between your car's wheel and the hub that the wheel mounts to on the car.Spacers push the wheel away from the hub ("spaced out"). These are used to widen the track of the vehicle, leading to more stability and better handling, which is why they are often used on racecars. Wheel spacers can also make a car look better by locating the wheel in a more visually aggressive position. There are two types of spacers: One type simply slide onto the hub, while the other type bolt to the vehicle's wheel studs. Bolt-on spacers have another set of studs that the wheel installs onto.
Item Details Bolt Pattern: 8x6.5 or 8x165.1mm
Fitment: Chevrolet Chevrolet Avalanche 2500 2002-2006
GMC GMC C2500 1988-2000
Hummer Hummer H2 2003-2009
Advantages of the Item 1. Improve Vehicle Stability: 2. Wheel spacers widen your vehicle wheel base, increasing stability, aggressive stance is a free bonus 3. Increase Clearence: 4. Wheel spacers increase tire to frame clearence to allow installation of lift/lowring kits and wider/larger, high traction tires. 5. Hardened CR-Steel Studs: 6. Forged, heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.
How to Install Wheel Spacers？ Step 1 Park your car or truck on a level surface. Loosen the lug nuts that fasten the wheel to the hub. Slide a floor jack under the car at the appropriate point and jack up the car. Lower the car onto a jack stand. Repeat this process until all four corners are supported on a jack stand. Step 2 Finish removing the lug nuts. Slide the wheels off the hub and set them out of the way. Spray degreaser on the lug studs and wipe them down with a rag. If they are very dirty, use a wire brush to clean up the threads. Wipe down the hub surface where the wheel installs, as well. Step 3 Slide the wheel spacer onto the studs, if it is not the bolt-on type. Line the holes in the spacer up with the wheel studs and then slide the spacer over the studs until it seats firmly against the hub. Some vehicle (BMWs for instance) use lug bolts that thread into the hub. In this case, line up the spacer with the holes in the hub. Step 4 Place the wheel spacer onto the studs, if it is a bolt-on wheel spacer. Install the lug nuts onto the studs so that the spacer is bolted to the hub. The bolts will come with the spacer, but are also available at auto parts stores if they are not with the spacer. Tighten the nuts that hold the spacer in place to the specifications outlined in the directions. This will likely be around 90 foot-pounds. Step 5 Slide the wheel onto the lug studs so that it seats firmly against the spacer. Install the lug nuts (or lug bolts) with the lug wrench and tighten them. Repeat for the other corners of the vehicle. Step 6 Slide the floor jack under the car and lift the vehicle so that the jack stands can be removed. Lower the vehicle to the ground, one corner at a time. Tighten the lug nuts with a torque wrench in a crisscross, star pattern. Tighten them to the manufacturer's recommended setting, which should be anywhere from 70 to 90 foot-pounds, depending on the vehicle. Check the tightness of the lug nuts after the vehicle has been driven 100 miles.
Package Includes 2 x Wheel Spacers
Note: 1. Make Sure You Get 5-7 Turns Before Tightening
Payment:
We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
Payment Options: Any payment which can be accepted by ebay.
If you want to change the shipping address, please contact us by eBay messages within 12 hours.
Payment must be received within 10 days as auction ended or order might be delayed.
Shipping:
1. More than 90% orders processed within 24 hours of payment verification. 2. We only ship to the address in order provided to us. Your order address will be the shipping address. 3. The images shown is the the actual item you will get and the size are for your reference. 4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns:
1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility. Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Contact Us:
Any question or problem, please feel free to contact us via ebay message. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
