Product advantages:
High quality material selection:
Selected wear-resistant and scratch resistant plastic shell with special treatment.
Easy to read and write:
48MB / s reading speed, easy file transfer without delay.
Metal chip
The metal chip has stable transmission and enjoys fast memory.
High pass rate:
The defect rate of small capacity is only three thousandths, and that of large capacity is only one thousandth. The qualified rate is high.
Tip:
The factory capacity of flash memory products is mostly calculated according to 1MB = 1000KB and 1g = 1000mb, while the operating system adopts binary algorithm, that is, 1MB = 1024KB and 1g = 1024MB. Therefore, there is a certain difference between the display capacity and nominal capacity of flash memory products.
Generally, the default file system of the operating system is fta32, and the unit file in the disk system does not exceed 4GB. If more than 4GB files need to be stored, the following methods are recommended:
1. Connect the flash memory product to the computer;
2. Right click the flash partition and select Format;
3. Select exFAT format in the file system;
4. Click start to finish.
Note: the exFAT file supports macl10.6.5, windows7, vista and XP system with the latest patch. The exFAT device will not be able to use the redyboost function of windows
Product parameters:
Specification: micmgn SDHC
Support SD protocol: sd2.0 / sd3.0
Capacity: 16g
Speed (MB / s): class2 / class4 / Class6 / class10 / uhs-i / uhs-ii
Memory card size: 15mm × 11mmx1.0mm(0.59in × 0.43in × 0.04in)
Number of pins: 8pin
Working voltage: 2.7v-3.3v
Operating temperature: - 25 ° C to 85 ° C
Storage temperature: 40 ° f to 185 ° f (- 40 ° C to 85 ° C)
Weight: 0.5g
Quantity: 1pcs