General technical data from the Manufacturer:
number of poles 1
tripping characteristic class C
mechanical service life (switching cycles) / typical 10 000
installation environment regarding EMC Suitable for environment B (immunity to interference not applicable) reference code / acc. to DIN 40719 extended according to IEC 204-2 / acc. to IEC 750 F
overvoltage category 3
degree of pollution 3
Voltage
insulation voltage / at AC / rated value 440 V
Supply voltage
supply voltage / at AC / rated value 400 V
operating voltage
● at AC / acc. to UL 489 and CSA C22.2 No. 5-02 /
maximum
240 V
● at DC / rated value / maximum 60 V
● at DC / single channel / acc. to UL 489 and CSA C22.2 No. 5-02 / maximum 60 V
● at DC / 2-channel / acc. to UL 489 and CSA C22.2
No. 5-02 / maximum 125 V
Protection class
protection class IP IP20, with connected conductors, IP 40 in the handle range
Switching capacity
switching capacity current
● acc. to EN 60898 / rated value 10 kA
● acc. to IEC 60947-2 / rated value 15 kA
Dissipation
power loss [W] / for rated value of the current / at AC / in
hot operating state / per pole 1.4 W
Current
operational current
at 30 °C / rated value 10 A
● at 40 °C / rated value 10 A
at 45 °C / rated value 9.7 A
● at 50 °C / rated value 9.4 A
● at 55 °C / rated value 9.1 A
● at 60 °C / rated value .88 A
● at AC / rated value 10 A
Main circuit
type of voltage supply / at AC / acc. to UL 489 and CSA C22.2 No. 5-02: 240
suitability for operation: Mechanical engineering / industry
Product details
product function / neutral conductor switching No
product feature / touch protection Yes
product component:
● tunnel terminals top No
● tunnel terminals bottom No
● combined terminal top Yes
● combined terminal bottom Yes
product feature:
● halogen-free Yes
● sealable Yes
● silicon-free Yes
product extension / installable / supplementary devices Yes
Product function
product function / note Terminal tightening torque for Cu, 60/75°C; 3.5Nm/31lb.in
Short circuit
breaking capacity short-circuit current (Icn) / at AC / acc.
to UL 1077 and CSA C22.2 No.235
14 kA
Connections
connectable conductor cross-section / finely stranded /
with core end processing
● minimum 0.75 mm²
● maximum 25 mm²
tightening torque / with screw-type terminals / maximum 3.5 N·m
position / of power supply cord Any
Environmental conditions
vibration resistance 50 m/s² at 25 to 150Hz and 60m/s² at 35Hz (4sec)
ambient temperature / during operation
● minimum 55 °C
● maximum -25 °C
ambient temperature / during storage
● minimum -40 °C
● maximum 75 °C