Features:
- Height : 20 cm (including spacing between segements)
- Width (Top) : 13 cm
- Width (Bottom) : 9.5 cm
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Without peeling, place the pad on the tank, align it and mark with paper tape.
3. Peel and apply the pad. Use a hair dryer to soften up if needed.
4. Press the air bubbles out.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.
Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.
Fits:
Universal for Motorcycles.
Package:
- 1 * Motorcycle Tank Pad