Specifications:
| Mechanical characteristics | ||
| Items | Specifications | Condition |
| Rotational torque (gf. cm) | 10~150gf.cm（Rotation speed: 60 ° / 1 second） | |
| Push-pull strength | 8Kgf min | |
| Total rotational angle | 300° | |
| stopper strength | 3Kgf.cm min | |
| Electrical characteristics | ||
| Items | Specifications | Condition |
| End resistance（Terminal :1-2, 2-3） | R≤10KΩ：≤10Ω； 10KΩ＜R≤250KΩ：≤20Ω； R＞250KΩ：≤0.1% R | |
| Ratings power | B Taper : 0.05W, Other taper : 0.025W | |
| Maximum operating voltage | B Taper :10V AC or 50V AC，Other taper : 5V DC or 25V AC | |
| Insulation resistance | DC 250V，100MΩ以上 100MΩ min. at DC 250V | |
| Dielectric strength | 1 minute at 300V AC | |
| Slider noise | 100mV max （before reflow and cycle test） | |
| Output signal | Refer to attached drawing | |
| Durability | ||
| Items | Specifications | Condition |
| Rotational life | Permissible resistance change after 15,000±200 cycles on 600 r.p.h .without load ±15% max. | |
| Operating temperature | -30℃~70℃ | |