1-3000MHz Gain 20dB
Description:
100% brand new and high quality
Power supply voltage: DC 12V (Current 75mA) with shielded enclosure
Input Output Impedance: 50 Ohm
Maximum output power: 19.5dBm（2VPP\50Ohm load）
Input signal: ≤0 DBM（＞0 DBM Input, the output signal has been distorted.)
Bandwidth: 1 MHZ ~3GHZ (gain is different under different frequency, specific please refer to the curve of S21 indicators.)
Noise factor: 2dB (1.5 GHz case measurement)
With metal casing shield.
Other: Whenever you need a different gain value, can reduce the supply voltage.
100% brand new and high quality
Power supply voltage: DC 12V (Current 75mA) with shielded enclosure
Input Output Impedance: 50 Ohm
Maximum output power: 19.5dBm（2VPP\50Ohm load）
Input signal: ≤0 DBM（＞0 DBM Input, the output signal has been distorted.)
Bandwidth: 1 MHZ ~3GHZ (gain is different under different frequency, specific please refer to the curve of S21 indicators.)
Noise factor: 2dB (1.5 GHz case measurement)
With metal casing shield.
Other: Whenever you need a different gain value, can reduce the supply voltage.
Noise figure:
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Dimensions: 50x70x12mm/1.97x2.76x0.47inch
Color: Green
Quantity: 1 Pc
Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1PCxLow Noise Amplifier Module
1PCxAnti-static packaging
0.01-2000MHz Gain 32dB
Package Included:
1PCx0.01~2000MHz 2Ghz 32dB Low Noise Amplifier DC Broadband LNA RF Module UHF HF VHF
0.1-2GHz Gain 64dB
Vector network analyzer measurement:
Chip S21 parameters:
Package Included:
1PCx0.1-2GHz 64dB Gain RF Broadband Amplifier Board
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Dimensions: 50x70x12mm/1.97x2.76x0.47inch
Color: Green
Quantity: 1 Pc
Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1PCxLow Noise Amplifier Module
1PCxAnti-static packaging
0.01-2000MHz Gain 32dB
Description:
1. the supply voltage: 12V DC (current 35MA) with a shielded shell
2. gain: 32DB input and output impedance: 50 ohms
3. the maximum output power: 10dBm (2VPP \ 50 ohm load)
4. the input signal: <= - 22DBM (greater than -22 dBm input when the output signal has been distorted)
5. bandwidth: 1MHz to 2GHz (different frequencies of the gain is different, please refer to the specific S21 curve indicators)
6. the noise figure: 2dB (0.5GHz measurement)
7. other: need different gain value, you can reduce the supply voltage, or custom.
3. the maximum output power: 10dBm (2VPP \ 50 ohm load)
4. the input signal: <= - 22DBM (greater than -22 dBm input when the output signal has been distorted)
5. bandwidth: 1MHz to 2GHz (different frequencies of the gain is different, please refer to the specific S21 curve indicators)
6. the noise figure: 2dB (0.5GHz measurement)
7. other: need different gain value, you can reduce the supply voltage, or custom.
Package Included:
1PCx0.01~2000MHz 2Ghz 32dB Low Noise Amplifier DC Broadband LNA RF Module UHF HF VHF
0.1-2GHz Gain 64dB
Description:
low noise amplifierLNA2-2G-64DB
1. Power supply voltage:12VDirect(Current 70MA)Shielding enclosure
2. Gain:64DB input and output impedance: 50 ohm
3. Maximum output power:10dBm (2VPP50Under ohmic load)
4. Input signal:<=-54DBM(greater thanDBm -54Input output signal has been distorted)
5. Bandwidth, bandwidth:1MHzreach(2GHzDifferent frequency gain is different, specific please refer toS21Curve index)
6. Noise coefficient:2dB (0.5GHzCase measurement)
7. Other: the need for different gain values, you can reduce the supply voltage
8. Point frequency gain:GAIN=63.41 dB F=30.29MHZ
GAIN=66.43 dB F=310.2MHZ
GAIN=64.54dB F=620.2MHZ
GAIN=55.59 dB F=1.210GHZ
GAIN=48.18 dB F=1.590GHZ
GAIN=38.44 dB F=1.810GHZ
GAIN=39.58 dB F=2.000GHZ
low noise amplifierLNA2-2G-64DB
1. Power supply voltage:12VDirect(Current 70MA)Shielding enclosure
2. Gain:64DB input and output impedance: 50 ohm
3. Maximum output power:10dBm (2VPP50Under ohmic load)
4. Input signal:<=-54DBM(greater thanDBm -54Input output signal has been distorted)
5. Bandwidth, bandwidth:1MHzreach(2GHzDifferent frequency gain is different, specific please refer toS21Curve index)
6. Noise coefficient:2dB (0.5GHzCase measurement)
7. Other: the need for different gain values, you can reduce the supply voltage
8. Point frequency gain:GAIN=63.41 dB F=30.29MHZ
GAIN=66.43 dB F=310.2MHZ
GAIN=64.54dB F=620.2MHZ
GAIN=55.59 dB F=1.210GHZ
GAIN=48.18 dB F=1.590GHZ
GAIN=38.44 dB F=1.810GHZ
GAIN=39.58 dB F=2.000GHZ
Vector network analyzer measurement:
Chip S21 parameters:
Package Included:
1PCx0.1-2GHz 64dB Gain RF Broadband Amplifier Board