|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|



Spacer Thickness: 1.5 inch or 38 mm
Vehicle bolt pattern: 4x4.5 inch or 4x114.3 mm
Wheel bolt pattern:4x4.5 inch or 4x114.3 mm
Thread Size:12x1.5
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 82.5 mm
Number of Pieces: 2pcs

| Acura CL 1997-1999 | Mazda 626 1983-1987 | Mazda RX-7 1984-1988 |
| Acura Legend 1986-1990 | Mercury Capri 1991-1994 | Suzuki Forenza 2004-2008 |
| Acura TL 1995-2000 | Mercury Tracer 1988-1990 | Suzuki Reno 2005-2008 |
| Acura Vigor 1992-1993 | Mitsubishi Galant 1985-1996 | Suzuki Verona 2004-2006 |
| Eagle Summit 1989-1993 | Mitsubishi Lancer 2002-2006 | Toyota Celica 1976-1985 |
| Ford Festiva 1988-1993 | Kia Optima 2001-2004 | Toyota Cressida 1985-1988 |
| Honda Accord 1990-2002 | Kia Spectra 2005-2008 | Toyota Van 1984-1989 |
| Honda Prelude 1992-1996 | Kia Spectra5 2005-2008 | Volvo S40 2000-2004 |
| Hyundai Accent 1998-2000 | Hyundai Sonata 1989-2001 | Volvo V40 2000-2004 |
| Hyundai Elantra 1992-2000 | Hyundai Tiburon 1997-1999 |

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.
4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.
6. Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.
7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.


2 Pcs 1.5" 4x4.5/ 4x114.3 Wheel Spacers 12x1.5 For Hyundai Elantra Honda Accord
Vehicle bolt pattern: 4x4.5 inch or 4x114.3 mm
Wheel bolt pattern:4x4.5 inch or 4x114.3 mm
Thread Size:12x1.5
Torqued Down By Hand At: 70-80 FT/LBS
Number of Pieces: 2pcs
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.
4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.
6. Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.
7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
Copyright of HK-ZHAOYU. All rights reserved. |